104Flash7Super FP flashFlash intensity controlSuper FP flash is available with the FL-50. Super FP flash timing is longer thanstandard flash timing. This means that pictures can be taken at a higher speed than ispossible with normal flashes.Flash shooting with the aperture open such asin portrait shooting is also possible with SuperFP flash. For details, refer to the FL-50 manual.This adjusts the amount of light emitted by the flash.In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), youmay get better results by adjusting light emission. It is useful when you intend toincrease the contrast (distinction between light and dark) of images to make theimages more vivid.1 In the menu, select T , then press.~“How to use the menus” (P. 38)● The setting screen is displayed.2 To increase light emission:Each time you press , light emissionincreases in steps of 1/3EV.To decrease light emission:Each time you press , light emissiondecreases in steps of 1/3EV.● You can select EV steps from 1/3EV, 1/2EV or1EV. ~ “EV STEP” (P. 125)3 Press the OK button repeatedly to exit the menu.● After setting is complete, is displayed on the control panel. disappears when it isset to 0.TIPSTo adjust light emission without using the menu:T Rotate the main dial or sub dial while holding down the (flash mode) button and(exposure compensation) button at the same time.OK buttonViewfinderNote● This does not work when the flash control mode on the electronic flash is set to MANUAL.● If light emission is adjusted on the electronic flash, it will be combined with the camera’slight emission setting.
