160Miscellaneous12TroubleshootingThe camera does not turn on or function buttons do not respond.Corrective actionSet the power switch to ON.Press the shutter button halfway.Charge the battery.Warm the battery by putting it in your pocket for awhile.The camera will not operate in the STORAGEmode while it is connected to a PC. The optionalOLYMPUS Studio software is required in theCONTROL mode.Ref. PageP. 26P. 130P. 17–P. 133No picture is taken when the shutter button is pressed.Possible causeThe battery is low.Subjects are difficult tofocus on (AF do not workproperly).Pictures are beingrecorded to the card.The flash is charging (if theflash is being used).The card is full.Corrective actionCharge the battery.Take a picture using MF (manual focus) or focuslock.During sequential shooting, no pictures can betaken when the camera's memory is full. Waituntil the sequential shot indication on the controlpanel and viewfinder is greater than 0.When RELEASE PRIORITY is set to OFF, nopictures can be taken while the flash is chargingin the fill-in flash mode. Wait until charging iscomplete before taking a picture.Insert a new card or erase unwanted pictures.Ref. PageP. 17P. 49, 54P. 73P. 99P. 23, 115Possible causeThe power is off.The camera enters thesleep mode.The remaining power levelof the battery is low.The battery is temporarilyunable to function becauseof the cold.The camera is connectedto a PC. Shooting Starting operation
