72Exposure5Auto bracketingNote● Auto bracketing is not possible in the following cases:• When the flash is on.● During WB bracketing, the camera cannot shoot in sequence if there is not enough memoryin the camera and card for storing more than the selected number of frames.● During sequential shooting, if the battery check blinks due to low battery, the camera stopsshooting and starts saving the pictures you have taken on the card. The camera may notsave all of the pictures depending on how much battery power remains.Three images with different white balances are automatically created from one shot.One is the image just taken with the specified white balance, one is the same imageadjusted in the red direction, and the third the same image adjusted in the bluedirection. All three images are saved on the card.1 In the menu, select T WB BKT TOFF, 3F 2STEP, 3F 4STEP or 3F 6STEP.~ “How to use the menus” (P. 38)2 Take a picture.● When the shutter button is pressed down allthe way, three images are automaticallycreated.WB bracketingDuring auto bracketingViewfinderControl panelDuring WB bracketing213F 2STEP3F 4STEP3F 4STEP3F 6STEP3F 6STEPWB BKTWB BKTNOISE REDUCTIONNOISE REDUCTIONOFFCANCELCANCEL SELECT GOGORARAW JPEGW JPEGNOISE FILNOISE FILTERTERSHADING COMPSHADING COMP.TIPSTo apply WB bracketing to white balance you have adjusted:T Adjust white balance manually, then use the WB bracketing feature. WB bracketing isapplied to your white balance adjustment.