25ENSwitching between themonitor and viewfinderBoth the monitor and viewfinder are available tocompose a shot. There may be cases where themonitor is difficult to see due to bright light beingreflected on it while shooting under a clear sky.In such cases, use of the view finder is helpfulwhen composing a shot.1 Press the u button.Each time the button is pressed, the cameradisplay switches between the monitor and theviewfinder.To view clearer images through theviewfi nderTurn the diopter adjustment dial whilelooking through the viewfinder until theviewfinder display appears sharp.Diopteradjustment dialViewfinderu button●Changing the shootinginformation displayThe display of the screen information can bechanged to best match the situation, such asclearing the view of the screen or for creatinga presicse compostion by the use of the griddisplay.1 Press the g button.The displayed shooting information changes inthe order shown below each time the button ispressed. “Shooting mode display” (p. 8)12 s12 s10M10M+2.0+2.0P44INNORMNORMISO1600ISO16001/4001/400 F3.5F3.512 s12 s10M10M+2.0+2.0P44INNORMNORMISO1600ISO160012s12s1/4001/400 F3.5F3.510M10M+2.0+2.0P44INISO1600ISO1600N ORMN ORM12s12s1/4001/400 F3.5F3.5NRNRNRNormalNo informationHistogramGrid[FRAME ASSIST] (p. 61),[u (Histogram)] (p. 61)Reading a histogramIf the peak fi lls too much of the frame,the image will appear mostly white.If the peak fi lls toomuch of the frame,the image willappear mostly black.The green section showsthe luminance distributionwithin the center of thescreen.●