Olympus SP-565 Instruction Manual

Contents

70 ENUsing OLYMPUS Master 2System requirements andinstallation of OLYMPUSMaster 2Install the OLYMPUS Master 2 softwarereferring to the included instalation guide.Connecting the camera to acomputer1 Make sure the camera is turned off.The monitor is off.The lens is retracted.2 Connect the camera to a computer.The camera automatically turns on.EASY PRINTUSBSET OKEXITCUSTOM PRINTPCConnector coverUSB cable (supplied)Multi-connectorLocate the position of the USB port byreferring to your computer instructionsmanual.3 Use 78 to select [PC], and pressthe o button.The computer automatically detects the camera asa new device on the first connection.●●●●WindowsAfter the computer detects the camera, amessage indicating the completion of thesetting appears. Confirm the message andclick “OK”. The camera is recognized as aremovable disk.MacintoshWhen iPhoto starts, exit iPhoto and startOLYMPUS Master 2.While the camera is connected to thecomputer, shooting functions are disabled.Connecting the camera to a computer via aUSB hub may cause unstable operation.When [MTP] is set for the submenu thatappears by pressing : after selecting [PC]in step 3, images cannot be transferred to acomputer using OLYMPUS Master 2.Starting OLYMPUS Master 21 Double-click the OLYMPUS Master 2icon.Windowsappears on the desk top.Macintoshappears in the OLYMPUS Master 2 folder.Browse window appears after starting thesoftware.When you start OLYMPUS Master 2 for thefirst time after installation, “Default Settings”and “Registration” screen appear. Follow theinstructions on the screen.●