Olympus SP-565 Instruction Manual

Contents

73ENSaving settings“Settings are not saved after the power isturned off”When mode dial is set to P, A, S, M or A:settings will be saved even if the power is turnedoff (except for self-timer, [PANORAMA] and[TIMELAPSE]).When mode dial is set to h or s :settings will be changed back to default when thepower is turned off (except for[DIMAGE QUALITY]).Error messageWhen one of the messages below isdisplayed on the LCD monitor, check thefollowing.Error message Corrective actionqCARD ERRORCard problemInsert a new card.qWRITEPROTECTCard problemUse a computer to cancel theread-only setting.>MEMORY FULLInternal memory problemInsert a card.Erase unwanted images. *1••qCARD FULLCard problemReplace the card.Erase unwanted images. *1••OKSETCARD SETUPCLEAN CARDFORMATCard problemUse 78 to select [CLEANCARD], and press theo button. Take out the card,wipe the contact area (p. 78)with a soft, dry cloth, and thenload the card again.Use 78 to select[FORMAT], and press theo button. Next, use 78to select [YES], and press theo button.*2••INOKSETMEMORY SETUPPOWER OFFMEMORY FORMATInternal memory problemUse 78 to select [MEMORYFORMAT], and press theo button. Next, use 78to select [YES], and press theo button.*2Recording hasstopped to allowcamera to cool.Please wait amoment. Operation problemAllow the camera to cool downbefore you begin shooting again.Camera iscooling.Please wait amoment.●●LNO PICTUREInternal memory/Card problemTake pictures before viewingthem.rPICTUREERRORProblem with selected imageUse photo retouch software,etc. to view the image on acomputer. If the image stillcannot be viewed, the image fileis corrupted.rTHE IMAGECANNOTBE EDITEDProblem with selected imageUse photo retouch software, etc.to edit the image on a computer.CARD-COVEROPENOperation problemClose the card cover.gBATTERYEMPTYBattery problemInsert new batteries.If using rechargeable batteries,charge the batteries.••NOCONNECTIONConnection problemConnect the camera andcomputer or printer correctly.NO PAPERPrinter problemLoad paper into the printer.NO INKPrinter problemRefill the ink in the printer.JAMMEDPrinter problemRemove the jammed paper.SETTINGSCHANGED *3Printer problemReturn to the status where theprinter can be used.PRINT ERRORPrinter problemTurn off the camera andprinter, check the printer forany problems and then turn thepower on again.rCANNOT PRINT *4Problem with selected imageUse a computer to print.*1 Before erasing important images, download them toa computer.*2 All data will be erased.*3 This is displayed, for instance, when the printer’spaper tray has been removed. Do not operatethe printer while making the print settings on thecamera.*4 This camera may be unable to print images taken byother cameras.