EN 19Button operations• When [IMAGE STABILIZER] is set to [ON], continuous movie recording for a long period willcause the camera’s internal temperature to rise and the camera may stop operationautomatically. Remove the battery and allow the camera to cool down for some time before youbegin shooting again. Or you can set [IMAGE STABILIZER] to [OFF].In addition, the temperature of the camera’s exterior also rises during usage. This is not amalfunction.The last picture taken is displayed.• Press the arrow pad to view other pictures.• Use the control dial to switch between close-up playback, index display and calendar display.g “Control dial Index display/Calendar display/Close-up playback” (P.22)Playing back moviesSelect a movie in the playback mode and press o to play.Operations during movie playback• Press o to pause the playback.This icon lights red during movie recording.The remaining recording time is displayed.When the remaining recording time reaches 0, recording will stopautomatically.q Viewing pictures you have taken/Selecting playback mode00:3400:34RECREC2008.08.262008.08.26 12:3012:30100-0004100-000444INMOVIE PLAY OK2008.08.262008.08.26 12:3012:30100-0004100-000400:12 /00:3400:12 /00:34IN1 : Increases the volume.2 : Reduces the volume.3 : Each time you press the button, the playback speed changes in the followingorder: 2×; 20×; and back to 1×.4 : Plays the movie in reverse. Each time you press the button, the playback speedchanges in the following order: 1×; 2×; 20×; and back to 1×.Playing time/Total recording time