Olympus SP-570UZ Advanced Manual

Also see for SP 570 - UZ Digital Camera: Basic Manual Specifications Instruction manual Manual Avanzado Manuel Avancé

Contents

Button operations24 EN• Flash options are disabled if the pop-up flash is closed.Press j in shooting mode to select the drive mode.Press o to confirm your selection.You can take a sequence of pictures at one time by holding down the shutter button. The camerawill take pictures continuously until you release the shutter button.• The exposure differential and number of frames for bracket shooting can be set in [DRIVE] in the[CAMERA MENU].g “DRIVE Continuous shooting” (P.40)Slide the AF/MF switch in shooting mode to set the focus mode.#SLOW2 Slowsynchronization 2The flash fires just before the shutter closes (2nd curtain).You can use this setting to create interesting effects in yourpicture, such as expressing the movement of a car byshowing the tail-lights streaming backwards. The slower theshutter speed, the more pronounced the effects.a j button Single-frame shooting/Sequential shootingo Single-frame shooting Shoots 1 frame at a time when the shutter button is pressed.j Sequential shooting Focus and exposure are locked at the first frame. Thesequential shooting speed varies depending on the imagequality setting.c High speed sequentialshooting 1Pictures can be taken at a faster speed than normal sequentialshooting.d High speed sequentialshooting 2Sequential shooting at a speed of approximately 13.5 frames/sec.g Pre-capture Sequential shooting at a speed of approximately 13.5 frames/sec. Pressing the shutter button halfway stores 10 frames of apicture immediately before shooting.i AF sequential shooting Adjusts the focus 1 frame at a time. The shooting speed isslower than for normal sequential shooting.7 Bracket shooting Takes pictures sequentially while changing the exposure foreach frame. Focus and white balance are locked at the firstframe.b AF/MF switch Changing the focus methodAF Press the shutter button halfway. The camera automaticallyfocuses.MF Adjust the focus manually.When set to [MF]• Press 4 3 to set the focus. During operation, the center of theframe is enlarged.• Hold down o to fix the focus. The focus is locked at thedistance you have set, and MF is displayed in red on themonitor. To adjust the focus, hold down o again.• The distance displayed on the monitor is a reference figure.• You can use the zoom ring or the control dial as well as 4 3 toadjust the focus.g “MANUAL FOCUS Selecting the focusing method in manualfocus mode” (P.58)1m1m 3m3m 5m5m10M10MP1/4001/400 F3.5F3.5 44MFINF INEF INE