Olympus SP-570UZ Advanced Manual

Also see for SP 570 - UZ Digital Camera: Basic Manual Specifications Instruction manual Manual Avanzado Manuel Avancé

Contents

EN 65Using OLYMPUS MasterNote• Use a computer with a pre-installed operating system. Operations are not guaranteed onhome-built computers or computers with an updated operating system.• Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port.• To install the software, you must log on as a user with administrators’ privileges.• If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon)before performing the following operations. Failure to do so could result in unstable computeroperation and the need to reboot.• Disconnect the cable connecting the camera to the computer• Turn off the camera• Open the camera’s battery/card compartment cover1 Make sure the camera is turned off.• The monitor and viewfinder are off.• The lens is retracted.2 Connect the multi-connector on the camera tothe USB port on the computer using theprovided USB cable.• Refer to your computer’s instruction manual to locate theposition of the USB port.• The camera turns on automatically.• The monitor turns on and the selection screen for the USBconnection is displayed.3 Select [PC], and press o.Connecting the camera to a computerFor how to install the OLYMPUS Master software, refer to the installation guideincluded in the CD-ROM.MonitorViewfinderConnector coverMulti-connectorEASY PRINTUSBSET OKEXITCUSTOM PRINTPC