Olympus SP-570UZ Advanced Manual

Also see for SP 570 - UZ Digital Camera: Basic Manual Specifications Instruction manual Manual Avanzado Manuel Avancé

Contents

EN 43Menu operationsSelecting an emission level• When flash is set to [SLAVE], flash mode automatically changes to [#] (Fill-in flash) for all flashmodes except [$] (Flash off).It automatically starts recording for about 4 seconds after shooting pictures.When recording, aim the camera microphone at the source of the sound you want to record.QFLASH ........................................................................ Setting to use an external flashINT/EXT Allows you to take pictures using the built-in flash or a dedicatedexternal flash.g “External flash shooting” (P.82)#RC Allows you to take pictures using a flash that is compatible with theOlympus wireless RC flash system.g “Shooting with the Olympus wireless RC flash system” (P.84)SLAVE When using a commercially available slave flash that is synchronizedwith the camera flash, the amount of the light emitted by the flash canbe adjusted in 10 levels.Press 12 to select an emission level from [1] to [10], then presso. The bigger number indicates the bigger amount of light emittedby the flash.• The flash can fire in sequential shooting mode, but the intervalbetween shots will be longer if a high emission level is set.R (still pictures) ......................................................... Recording sound with still picturesOFF /ON> .................................................................. Adjusting the white balance compensation• The white balance can be adjusted in 7 increments in both the[BLUE] and [RED] directions.12::Each press makes the color more blue.Each press makes the color more red.Press o after setting is complete.PICTURE MODE ....................................................... Adjusting the color tone of the imageVIVID Produces vivid colors.NATURAL Produces natural colors.SLAVE FLASH1MENUBACK SET OK>REDBLUEMENUBACK SET OK