Chapter 16 Performing HotSync ® Operations1723. Adjust the following options as needed.4. Click OK.To prepare a Mac computer for a modem HotSync operation:1. Confirm that the computer modem is connected and turned on, and that nocommunications applications, such as fax or telephony software, or AppleTalknetworking are running on that serial port.Make sure your computer is disconnected from all online services, such asCompuServe and America Online (AOL). This helps to avoid conflicts with theserial port. In addition, your computer must be on, and it should not be in sleepmode when receiving a call from a remote handheld.2. Double-click the HotSync Manager icon in the Palm folder.3. Click the HotSync Controls tab and enable the Transport Monitor, if it is notalready enabled.4. Click the Connection Settings tab.Serial Port Identifies the port for the modem. If you are unsure of the portassignment, look at the Modem Properties in the WindowsControl Panel.Speed Determines the speed at which data is transferred. Try the AsFast As Possible rate first, and adjust downward if youexperience problems. This setting allows your handheld tosynchronize with your computer at the fastest speed possible.Modem Identifies the modem type or manufacturer. Refer to yourmodem manual or faceplate for its type or settings. If you’re notsure of your modem type or if your modem doesn’t match anythat appear in the list, select Hayes Basic.Setup String Identifies the setup string for your particular modem. Not allmodems require a setup string. Refer to your modem manual,and enter the setup string if it is recommended by themanufacturer.
