Panasonic AG-3200 Operating Instructions Manual

Contents

— 16 — FRONT AUX INPUT — VIDEO/S-VIDEOYou have to select which terminal — either VIDEO (composite) orS VIDEO (Y/C separate signals) to use as the video input terminalon the front panel.Make sure to select the correct terminal; otherwise, you may failin recording (editing) on this VCR. REAR AUX INPUT — VIDEO/S-VIDEOYou have to select which terminal — either VIDEO (composite) orS VIDEO (Y/C separate signals) to use as the video input terminalon the rear panel.Make sure you select the correct terminal; otherwise, you may failin recording (editing) on this VCR.Satellite Auto RecordingYou can automatically record a satellite program which is timer-programed on your DBS receiver.A Connect a DBS receiver to the AUDIO/VIDEO IN connectors onthe rear panel. You can also connect the cable box if it has a timer.B Set timer program on DBS receiver referring to its instructionmanual.C Load a cassette with the record safety tab intact.D Press SP/EP to set the tape speed. The selected tape speed willappear on the TV screen.E Press REC LINK for more than 2 seconds. The VCR turns offautomatically and enter the Satellite Auto Recording standbymode (“L-1” and “#” light up). When signals come into theVCR from the DBS receiver, the VCR starts recording (“#” and“” light up and “L-1” blinks). When no signals come into theVCR, the VCR stops recording (“” goes off).NOTES:● Be sure not to turn on the DBS receiver before the program startsbroadcasting; otherwise, the VCR will start recording when theDBS receiver is turned on.● To disengage the Satellite Auto Recording standby mode, pressREC LINK (“#” goes off).● Depending on the type of satellite receiver, Satellite AutoRecording may not be compatible.Child LockYou can disable the VCR operations. While the VCR is turned on,press and hold POWER 1 on the Remote for more than10 seconds. The VCR turns off, “CL” appears for about 5 secondson the display panel.To release the child lock, press and hold POWER 1 on theRemote until the VCR turns on.NOTES:● Pressing TIMER during timer recording, unplugging the ACpower cord or a power outage also releases the child lock.● When the child lock function is in use, keep the Remote out ofthe children’s reach.● Timer recording programs will be performed even if the childlock function activated.Multi-Brand Remote ControlThis Remote can control some functions of remote controllableTVs, cable boxes or DBS (Direct Broadcast Satellite) receiverslisted below. Without setting, you can control a PANASONIC TV.NOTES:● Some unit’s brands have more than one code. If the unit doesnot function with a specified code, try other codes.● Depending on the type of unit, some or all functions cannot beoperated using this Remote.● It is not possible to operate a unit not equipped with a remotesensor.● It is not possible to set the Remote for both your cable box and aDBS receiver at the same time.● Once you have set the Remote to operate the unit, you do nothave to set it until you replace the batteries from the Remote.● If the batteries of the Remote are discharged, the Remote maynot be able to control the TV, cable box or DBS receiver.Replace the batteries.TV Brand SettingA Turn on TVTurn on the TV using the Power button on the TV or its Remote.B Set TV brand codeA Press and hold TV.B Press MBR SET.C Press the Number keys to enter your TV’s brand code.D Press OK, and release TV. The TV should turn off.C Operate TVWhile holding down TV, press one of the following buttons:POWER 1, TV/VCR, TV CH+/–, ^ (TV Muting), TV VOL+/–,and the Number keys.● For some brands, you must press ENTER after having pressed theNumber keys to enter a channel number.TV BRAND CODE TV BRAND CODEPANASONICHITACHIJVCMAGNAVOXMITSUBISHIRCASHARP04, 111001, 0302030506SONYSAMSUNGSANYOSEARSTOSHIBAZENITH071213130809