Panasonic AG-3200 Operating Instructions Manual

Contents

— 5 —Front PanelRear PanelRemoteOn-screen displayIf you press OSD (OK) on the Remote when “SUPERIMPOSE” isset to “ON” ( pg. 15), you can see the current VCR status on theTV screen.The indications are not recorded even if the VCR is in therecording mode.Buttons, Connectors andIndicatorsREW FFREC LINK24HR QUICKPROGRAMS-VIDEOPOWER INSERT A.DUBCassetteloading slotVIDEO/AUDIO inputconnectorsDisplay panelVCR modeindicatorPlay indicatorRecord indicatorTimer mode indicatorChannel and auxiliary input/Clock timeRemotesensorAdvancedJOG dialS-VIDEOinputconnectorS-VHSindicatorS-VIDEOAC power cord The glow-in-the-dark buttons shown in white on the illustrationabove are helpful when using the Remote in darkened rooms.To recall an indicationA Press OSD (OK).● All indications corresponding to the current status aredisplayed for 5 seconds. After that, the counterinformation and RECORD/PAUSE if in the Record Pausemode, remain on the TV screen.B Press OSD (OK) again to clear the display.● The RECORD/PAUSE indication remains on the TV screen.Number keysChannel andauxiliary inputDay andclock timeSTEREOprogramindicationSAPindicationAudiomonitorindicationsVCR operationmodeTape speedCassette markTape positionIndex numberTimer warning displayTime counterTaperemaining time