Panasonic AG-3200 Operating Instructions Manual

Contents

— 17 —Cable Box or DBS Receiver Brand SettingA Turn on cable box or DBS receiverTurn on the cable box or DBS receiver using the Power button onthe unit or its Remote.B Enter brand codeA Press and hold CABLE/DBS.B Press MBR SET.C Press the Number keys to enter your cable box’s (or DBSreceiver’s) brand code.D Press OK, and release CABLE/DBS.C Operate cable box or DBS receiverWhile holding down CABLE/DBS, press one of the followingbuttons: POWER 1, TV CH+/–, and the Number keys.● For some brands, you must press ENTER after having pressed theNumber keys to enter a channel number.● To change the cable box’s (or DBS receiver’s) channels, press TVCH+/– or the Number keys. (The CH+/– button can be used tochange the VCR’s channels only.)Changing Remote Control CodeThis Remote is capable of transmitting two control codes; one setto respond to A code control signals and another set to respond toB code control signals. This Remote control is preset to send Acode signals because your VCR is initially set to respond to A codesignals. You can easily modify your VCR and the Remote torespond to B code signals. When using two PANASONIC VCRs,set two VCRs and their Remotes to different codes, so that you canoperate these VCRs separately.A Set remote control code for RemoteA Press and hold A/B.B Press the Number key “2”.C Press OK, and release A/B.● The Remote now can transmit B code control signals.B Check remote control code for VCRPress and hold 4 on the VCR for more than 5 seconds while theVCR is turned off. The code currently set appears on the displaypanel.C Change code for VCRPress any key on the Remote. The VCR now responds to B codecontrol signals.● To set the Remote and the VCR back to A code control signals,repeat the same procedure as shown above except pressing theNumber key “1” in step B of 1111 .To control two VCRs with the same RemoteYou can control two PANASONIC VCRs by switching the remotecontrol code for the Remote between A and B ( step AAAA ),keeping two VCRs to different control codes.● To change only the remote control code for the Remote, DONOT perform steps BBBB and CCCC .CABLE BOX BRAND CODEPANASONICARCHERCABLETENNACABLEVIEWCITIZENCURTISDIAMONDGC BRANDGEMINIGENERAL INSTRUMENTSHAMLINJASCOJERROLDNOVAVISIONOAKPULSERRCAREGALREMBRANDTSAMSUNGSCIENTIFIC ATLANTASIGMASL MARXSPRUCERSTARGATETELEVIEWTOCOMUNIKAUNIVERSALVIDEOWAYZENITH13, 1401, 05, 1701, 1715, 16, 17, 21, 2515, 16, 17, 21, 250201, 1715, 16, 17, 21, 251501, 04, 06, 11, 12, 15, 2810, 18, 231501, 04, 06, 11, 12, 15, 28020715, 16, 17, 21, 2513, 1410, 18, 2301, 16, 1705, 16, 24020705, 16, 17, 24, 2513, 1405, 15, 16, 17, 21, 24, 2505, 16, 2401, 04, 1601, 1716, 17, 2503, 09, 2203, 09, 22DBS RECEIVER BRAND CODEECHOSTAR (DISH Network)JVC (DISH Network)SONY (DSS)RCA (DSS)51514140