Panasonic AG-3200 Operating Instructions Manual

Contents

— 8 —Setting clock manually— Manual Clock SetFirst follow steps 1111 to 2222 in “Preparations” above, then go to thefollowing steps.A Set time, date and yearPress rt until the desired time appears,then press OK or e. Set the date and yearin the same way.● Holding rt changes the time in 30-minute intervals, or changes the date in15-day intervals.B Select D.S.T. modePress OK or e to move the highlight bar to“D.S.T.”, then press rt to select thedesired setting.ON: Adjustment will be made by thebuilt-in clock itself.OFF: Select when Daylight Saving Timedoes not apply to you.C Start clockPress MENU and normal screen appears.To make corrections any time during the processPress OK or e repeatedly until the item you want to changeblinks, then press rt.Tuner SettingSetting channels automatically— Auto Channel SetPerform Auto Channel Set only if channels have not been setcorrectly by the Plug&Play setting.A Access Main Menu screen, then TunerSet screenPress MENU on the Remote. Press rt tomove the highlight bar (arrow) to “TUNERSET”, then press OK or e.B Perform Auto Channel SetPress rt to move the highlight bar(arrow) to “AUTO CHANNEL SET”, thenpress OK or e. The VCR selects the correctband (TV or CATV) automatically duringAuto Channel Set.● When Auto Channel Set is complete,“SCAN COMPLETED” appears onscreen.● If the scan was unsuccessful, “SCANCOMPLETED–NO SIGNAL–” appears onscreen. Check the connections and startagain.Press MENU to return to normal screen.Setting channels manually— Manual Channel SetYou can add the channels you want or delete the channels you donot want manually.A Access Main Menu screen, then TunerSet screenPress MENU on the Remote. Press rt tomove the highlight bar (arrow) to “TUNERSET”, then press OK or e.B Access Manual Channel Set screenPress rt to move the highlight bar(arrow) to “MANUAL CHANNEL SET”,then press OK or e.C Add or skip desired channelsTo add channelsA Press the Number keys on the Remoteto input a channel number you want toadd.B Press OK or e to set to “ADD”.C Repeat A to B to add other channels.Press MENU to return to normal screen.To skip channelsA Press rt or the Number keys to select a channel number youwant to skip.B Press OK or e to set to “SKIP”.C Repeat A and B to skip other channels. Press MENU to returnto normal screen.Manual setting of the clock will be lost after a power failureoccurs.After a power failure occurs, band selection will be reset to“CATV”.