Panasonic AG-3200 Operating Instructions Manual

Contents

— 7 —Language SettingThe default setting is “ENGLISH”.A Access Main Menu screen, then InitialSet screenPress MENU on the Remote. Press rt tomove the highlight bar (arrow) to “INITIALSET”, then press OK or e.B Select languageThis VCR offers you the language choice toview menus and some messages — inEnglish, Spanish or French. Press rt tomove the highlight bar (arrow) to“LANGUAGE”, then press OK or erepeatedly until the desired language isselected.Press MENU to return to normal screen.Clock SettingPerform clock setting only if the clock has not been set correctlyby the Plug&Play setting or if you use a cable box.PreparationsA Access Main Menu screen, then InitialSet screenPress MENU on the Remote. Press rt tomove the highlight bar (arrow) to “INITIALSET”, then press OK or e.B Access Clock Set screenPress rt to move the highlight bar(arrow) to “CLOCK SET”, then press OK ore.Setting clock semiautomatically— Semiauto Clock SetYou can change the host channel/D.S.T. (Daylight Saving Time)/time zone setting manually. First follow steps 1111 to 2222 in“Preparations” above, then go to the following steps.NOTE:The time set previously will be erased when “AUTO CLOCK”,“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.A Set Auto Clock to ONPress OK or e on the Remote repeatedly tomove the highlight bar to “AUTO CLOCK”,then press rt so that “ON” is selected.B Select host channelYou can either select “AUTO” or enter a PBS channel number.Press OK or e to move the highlight bar to “HOST CH”, thenpress rt repeatedly until “AUTO” or the desired PBS channelnumber is selected.● Some PBS channels do not transmit clock setting data.C Select D.S.T. modePress OK or e to move the highlight bar to “D.S.T.”, then pressrt repeatedly until the desired setting is selected.AUTO: Select if you want to adjust your VCR’s clockautomatically by the incoming signal from the hostchannel. (Auto Daylight Saving Time enables automaticadjustment of the VCR’s clock at the start and end ofDaylight Saving Time.) Be sure to select the correct timezone manually in step 4444.ON: Adjustment will be made by the built-in clock itself.OFF: Select when Daylight Saving Time does not apply to you.D Select time zonePress OK or e to move the highlight bar to “TIME ZONE”, thenpress rt repeatedly until “AUTO” or the desired time zone isselected. Each time you press the button, the time zone changes asfollows:{ AUTO { ATLANTIC { EASTERN { CENTRAL{ MOUNTAIN { PACIFIC { ALASKA { HAWAII{ (back to the beginning)E Complete Semiauto Clock SetPress MENU to return to normal screen. Turn off the VCR. “Aut”will appear on the display panel while the clock is being set. Thecurrent clock time will appear automatically when the clocksetting is complete.Initial SettingsLanguage selection will be reset to “ENGLISH” after a powerfailure occurs.MAIN MENUFUNCTION SETTUNER SETINITIAL SETPRESS ( , ), THEN (OK)PRESS (MENU) TO ENDSELECT WITH ( , ) AND (OK)PRESS (MENU) TO ENDINITIAL SETCLOCK SETLANGUAGE ENGLISHGUIDE CHANNEL SET* CABLE BOX SET* DBS RECEIVER SET* not function with this VCRMAIN MENUFUNCTION SETTUNER SETINITIAL SETPRESS ( , ), THEN (OK)PRESS (MENU) TO ENDSELECT WITH ( , ) AND (OK)PRESS (MENU) TO ENDINITIAL SETCLOCK SETLANGUAGE ENGLISHGUIDE CHANNEL SET* CABLE BOX SET* DBS RECEIVER SET* not function with this VCRSelections of host channel and D.S.T. mode will be reset to“AUTO” after a power failure occurs.PRESS ( , ), THEN (OK)PRESS (MENU) TO ENDCLOCK SETTIME DATE YEAR– –:– – AM 1/ 1 02AUTO CLOCK : ONHOST CH : AUTO (CATV)D.S.T. : AUTOTIME ZONE : AUTOCONTINUED ON NEXT PAGE