| 
– 113 –Chapter 5 Shooting — ShootingShootingFor shooting, use the following steps.2131 REC button (on the handle)2 REC button (on the grip)3 switch1 Set the video settings and the audio input.f Before shooting, the followings must be set or adjusted.‑ Image settings for the brightness function (iris, gain, shutter) and the white balance adjustment function, etc.‑ Audio input settings for audio recording.‑ Adjusting audio recording level2 Select shooting mode with the switch.: auto modef [A] is displayed at the upper part of the viewfinder and LCD monitor.f Focus, iris, gain, shutter, and white balance are automatically adjusted.f You can set the operations specified for the auto mode in the [CAMERA] menu → [AUTO SW].: manual modef To adjust focus, iris, gain, shutter speed, and white balance manually, set the camera to manual mode.f To adjust the brightness, adjust the iris and ND filter. (page 115)f To focus manually, use the focus operation. (page 115)f To adjust the white balance, adjust the white balance and black balance. (page 117)f To adjust the setting of the audio input and the recording level, switch audio input. (page 126)3 Start the recording by pressing the REC button.f One REC button is located on both the handle and the grip.f The tally lamp is illuminated in red while recording.4 Press the REC button again to stop.5 Check videos recorded.After recording ends, pressing the button automatically plays back approximately the last three seconds of the last recorded clip.In this way, you can check whether video has been recorded properly.f Returns to recording standby after checking.Selecting the resolution, codec, and frame rate for recording videoThe resolution, codec, and frame rate of the recording video can be selected.f [SYSTEM] menu → [FREQUENCY]: System frequencyf [SYSTEM] menu → [FILE FORMAT]: File format for recordingf [SYSTEM] menu → [ASPECT]: Aspect ratio of the video to record in the signal format of the SD resolution (480i and 576i)f [SYSTEM] menu → [SUPER SLOW]: Super slow recording settingsf [SYSTEM] menu → [SHOOTING MODE]: Shooting mode settings according to the shooting environmentf [REC FORMAT]: Sets the signal format and codec mode for recording.f [SCENE FILE] menu → [VFR]: Variable frame rate recording function (variable frame rate range) |
