Panasonic AG-CX350 Operating Instructions Manual

Also see for AG-CX350: Manual Manual Manual How to connect Operating instructions

Contents

– 96 –Chapter 4 Operation — Menu settingsf When [FREQUENCY] is [59.94Hz] and [FILE FORMAT] is [AVCHD]The items that can be set are as follows.- [1080-59.94p/AVCHD PS], [1080-59.94i/AVCHD PH], [1080-59.94i/AVCHD HA], [1080-23.98p/AVCHD PH], [720-59.94p/AVCHD PM], [480-59.94i/AVCHD SA](Factory setting: [1080-59.94i/AVCHD PH])[ASPECT]Sets the aspect ratio of the video to record in the SD signal format (480i and 576i).[4:3] Records using standard 4:3 mode. Cut both the left and right edges.[16:9] Camera images are compressed in the horizontal direction when recording. Replaying recorded images on a TV monitor thatsupports a wide screen will convert the images to an aspect ratio of 16:9.(Factory setting: [4:3])[SUPER SLOW]Sets the super slow recording. Enable this setting to shoot slow motion video.The items that can be set are as follows.f [ON], [OFF](Factory setting: [OFF])@@ NOTEt This setting is fixed to [OFF] when anything other than the [SYSTEM] menu → [FILE FORMAT] → [MOV] is set.t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to anything other than 1920×1080.t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/50.00i.[SHOOTING MODE]Sets the shooting mode according to the shooting environment.[NORMAL] Selects the shooting mode for an environment at normal brightness.[HIGH SENS.] Selects high-sensitivity. (Appropriate when shooting in a dark environment.) [H.SENS.] is displayed in the camera imagescreen.(Factory setting: [NORMAL])[OTHERS] menuConfigures the settings for writing/loading/initializing user files to the internal memory and other settings of the camera.[FILE]Saves and loads the setting data.For the saving and loading target, refer to “Target items for scene file/setup file/initialization” (page 102).For details about saving and loading, refer to “Handling setting data” (page 109).[SCENE FILE(SD CARD)]Loads or saves scene files on a memory card.[LOAD] Selects and loads the scene file saved on the memory card into the camera.Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.[SAVE] The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files savedin the memory card.[SAVE AS] The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the filename.[SETUP FILE(SD CARD)]Loads or saves setup files on a memory card.[LOAD] Selects the setup file saved on the memory card to load on the camera.[SAVE] Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of thecamera.[SAVE AS] Enter a file name to save the current setting values in the camera as a new setup file in the memory card.[SETUP FILE(MEMORY)]Loads/saves/initializes setup files in the internal memory of the camera.[LOAD] Loads setup data saved on the memory.[SAVE] Saves the setup data to the memory.[INITIALIZE] Restores the factory settings from the current settings for the menus in the setup data.