– 89 –Chapter 4 Operation — Menu settings[ON] Performs the pre-recording.The pre-recording time is as follows.f When [REC FORMAT] is [2160-29.97p/422ALL-I 400M], [2160-25.00p/422ALL-I 400M], or [2160-23.98p/422ALL-I 400M]:Approximately 3 secondsf When [REC FORMAT] is [2160-59.94p/420LongGOP 150M], [2160-59.94p/HEVC LongGOP 200M],[2160-50.00p/420LongGOP 150M], [2160-50.00p/HEVC LongGOP 200M], [2160-29.97p/420LongGOP 100M],[2160-29.97p/HEVC LongGOP 150M], [2160-29.97p/422LongGOP 150M], [2160-25.00p/420LongGOP100M],[2160-25.00p/HEVC LongGOP 150M], [2160-25.00p/422LongGOP 150M], [2160-23.98p/420LongGOP 100M],[2160-23.98p/ HEVC LongGOP 150M], or [2160-23.98p/422LongGOP 150M]: Approximately 5 secondsf Other than above: Approximately 10 seconds[OFF] Does not perform the pre-recording.(Factory setting: [OFF])@@ NOTEt For the combinations and restrictions of the settings, refer to “Recording function that cannot be used simultaneously” (page 190).[REC FUNCTION][REC MODE]Selects the recording mode.[NORMAL] Performs the standard recording.[INTERVAL] Performs the interval recording. (A function to repeatedly perform the operation of one frame recording in set time interval.)(Factory setting: [NORMAL])@@ NOTEt For the combinations and restrictions of the settings, refer to “Recording function that cannot be used simultaneously” (page 190).[REC MODE HOLD]Selects whether to hold [REC MODE] settings.[ON] Holds the settings.[OFF] Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on.(Factory setting: [OFF])[INTERVAL TIME]Sets the interval duration for interval recording.The items that can be set are as follows.f [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min](Factory setting: [5min])[TC/UB][TC PRESET]Sets the default value of the time code to record.Hour [00]…[23]Minute [00]…[59]Second [00]…[59]Frame [00] … [23] (when [23.98p])[00] … [24] (when [50.00i], [50.00p], or [25.00p] is set)[00] … [29] (when [59.94i], [59.94p], or [29.97p] is set)(Factory setting: [00]) (each item)[UB PRESET]Sets user bits.Enabled only when [USER] is selected in [UB MODE] of [TC/UB].Each digit can be set in following range.f [00]…[FF](Factory setting: [00])[FREE/REC RUN]Sets the operation mode to advance the time code generator.[FREE RUN] Advances regardless of the operation mode.[REC RUN] Advances only while recording.(Factory setting: [REC RUN])@@ NOTEt The setting is fixed to [REC RUN] when the [SCENE FILE] menu → [VFR] → [ON] is set.
