Chapter 5 Shooting — Convenient shooting functions- 133 -Convenient shooting functionsZebra patterns displayThe unit can display 2 types of zebra patterns to the output image from the LCD monitor.1 Select the [VIDEO OUT/LCD/VF] menu → [EI ASSIST] → [ZEBRA] → [ON].≥ You can also either press the USER button assigned to [ZEBRA] or touch the USER button icon to display the zebra pattern and switch display/hide. This changes depending on the [ZEBRA] settings.Setting the detection level1 Set each item in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].∫ Display area of the zebra patternThe display area of the zebra pattern varies depending on the [VIDEO OUT/LCD/VF] menu → [EI ASSIST] setting.@ NOTE0 The zebra pattern cannot be recorded.0 To record video with less overexposure, manually adjust the shutter speed and brightness (iris/gain) so that the zebra pattern is no longer displayed.(l 107, 108, 111)Displaying the markerDisplaying the center markerA center marker can be displayed.1 Select the type of the center marker in the [VIDEO OUT/LCD/VF] menu → [MARKER] → [CENTER MARKER].≥ The center marker is not displayed when [OFF] is selected.[ZEBRA] settings Operation when the USER button is pressed[MOMENT] Displays the zebra pattern for approximately 5 seconds.[ON], [OFF] Switches display/hide of the zebra pattern.Item Description of settings[ZEBRA1 DETECT] Sets the detection level of zebra pattern 1.[50%]…[105%][ZEBRA2 DETECT] Sets the detection level of zebra pattern 2.[50%]…[105%][ZEBRA2] Switches enable/disable of zebra pattern 2.[ON], [OFF]A [ZEBRA2]B [ZEBRA2 DETECT]C [ZEBRA1 DETECT]1 [ON]2 [OFF][1] [2] [3] [4][105%][0%]
