Chapter 1 Overview — What you can do with this unit- 15 -Connecting to the network(For the / )This unit is equipped with wireless LAN. It can connect to wireless LAN devices via a network.(For the )This unit is equipped with wireless LAN. It can connect to networks via wireless LAN or wired LAN.To use a wired LAN, use the supplied USB HOST conversion cable and USB ethernet adaptor to connect a LAN cable.Use the following cable for connections:j LAN cable (STP* , category 5 or better, maximum 100 m)* STP (Shielded Twisted Pair)≥ Do not use any other USB HOST conversion cables except the supplied one.≥ Do not use any other USB ethernet adaptors except the supplied one.Available functionsWhen the unit is connected to a network, the following functions are available.∫ Connecting to HC ROP appYou can remotely control this unit with the HC ROP app by connecting this unit with an iPhone/iPad or Android terminal via wireless LAN.≥ Checking camera status≥ Camera remote control (focus, zoom, image quality settings, recording control such as start/end recording, and time code/user bits settings)≥ Menu Operations≥ Starting and stopping streaming (when the function is assigned to the USER button)The unit supports the multi camera function, with which a camera selected from up to 8 cameras is remotely controlled from a single device.For details about operation of the HC ROP app, refer to the online help for the app.∫ Streaming functionYou can perform streaming of audio and video currently shot with the unit over a network (wired LAN */wireless LAN).* Available for use when using .∫ (For the )NDI|HX functionThis unit can be connected to a network via a NewTek NDI|HX compatible switcher and a wired LAN.CX7 CX8CX10CX10CX10
