Chapter 4 Operation — Menu settings- 60 -Menu settings[THUMBNAIL] menuPerforms confirmation or deleting of the recording clip.This menu can be set when the thumbnail screen is displayed.[PLAYBACK]Sets the playback of recorded clips.[ALL SLOT] will always be selected when you switch from the camera image screen to the thumbnail screen.[CLIP SEL]Selects a clip to be displayed on the thumbnail screen.(Factory setting: [ALL SLOT])[RESUME PLAY]Select if the playback is to start from the position the playback has stopped or not.(Factory setting: [OFF])[CLIP]The clip can be protected or copied to a different memory card.* Available for setting when using .@ NOTE0 (For the )The clip recorded in P2 format cannot be protected.0 The clip recorded in MOV format/MP4 format cannot be copied.[DISPLAY]Sets the display of the thumbnail screen.[DATA]Selects the content to be displayed in the time code display area.(Factory setting: [START TC])[ALL SLOT] Displays the clips recorded on all the memory cards in each card slot.[SLOT1] Displays only the clips recorded on the memory card in card slot 1.[SLOT2] Displays only the clips recorded on the memory card in card slot 2.[SAME FORMAT] Displays only the clips recorded in the same format as the system format.Clips recorded in the same format means that each item of [FREQUENCY], [FILE FORMAT], and [REC FORMAT] in the[SYSTEM] menu matches the current setting status.[ON] Plays back from the position where playback has stopped.[OFF] Always starts the playback from the beginning of the clip.[PROTECT] [SELECT] Protect the clip so it is not mistakenly deleted.Select the clip to protect, and set the protect.[DELETE] [ALL] Deletes all the clips displayed in the thumbnail screen.The clip that is not displayed in the thumbnail screen is not deleted.[SELECT] Select the clip to delete, and delete it.[COPY] [ALL] Copies all clips to a different memory card.[SELECT] Selects the clip to copy, and copies the clip to a different memory card.[REPAIR]* Repairs a clip displaying caused by the sudden power loss, etc., during recording inP2 format.[INFORMATION] Displays the detailed information of the clip.[START TC] Displays the time code value at the start of the recording.[CLIP NAME] Displays clip names.CX10CX10
