Panasonic AG-DV1DC P Operating Instructions Manual

19Recording FeaturesBasic Recording1 Set the POWER to ON while pressingthe white button.• The POWER lamp lights red.• Be sure POWER is fully turned to theON position.2 Press MENU to display the MAINMENU screen.3 Press +/– to select REC MODE , thenpress SET to display the REC MODEmenu screen.4 Press +/– to select AV JACK in theREC MODE menu. Press SET toselect IN. (Menu OSD: p.29)5 Press +/– to select AUDIO SEL , thenpress SET to select LINE.• “LINE AV IN” will appear on thescreen.• Set LINE OUT: ON in the DISPLAYmenu to display the OSD screen onyour TV monitor.6 Press +/– to select REC SPEED in theREC MODE menu. Press SET toselect “SP” or “LP”.(Menu OSD: p. 29)• Press MENU twice to exit.7 Turn your TV ON and set it to LINEINPUT or S-VIDEO.Check your TV operating instructionsfor further information.8 Press (REC) to start recording.• The REC Lamp lights red.9 Press (PAUSE) to pause.10Press (STOP) to stop recording.Basic Recording Before you begin• Connect this unit to a power source.(pp. 9, 10)• Insert a cassette with the record tabclosed. (p. 6)10STOP8REC1POWER9PAUSERECLamp• If left in Record/Pause for 5 minutes, thisunit will automatically go into Stop mode.• Make sure this unit and TV are turned offwhile connecting.• Please connect the A/V Cable securely.NoteBack of TVAudio Out S-Video OutBack of TVAudio Out Video OutS-VIDEOINAV Cable(Supplied)To Video OutTo Audio OutA/V INFor best Chrominance and Luminance, usethe S-Video connection if available on yourTV.A/V Cable(Supplied)[ TV with S-VIDEO OUT Jacks ]A/V IN[ TV with AUDIO/VIDEO OUT Jacks ]DC Cable(Supplied)Note3, 4, 6+/–(SELECT)2MENU 3, 5, 6SETTo S-Video OutTo Audio OutS-Video Cable(Not supplied)