Panasonic AG-DV1DC P Operating Instructions Manual

20Recording FeaturesExternal Microphonewith M3 connector (notsupplied)ExternalMicrophone JackThe original sound can be replaced withnew sound using an external microphoneor external recording source.Audio Dubbing using theExternal Microphone orExternal Recording Source1 Set POWER to ON while pressing thewhite button.2 Press (PLAY). Then press(PAUSE) where you want dubbing tobegin.3 Press MENU to display the MAINMENU screen.4 Press +/– to select REC MODE , thenpress SET to display the REC MODEmenu screen.5 Press +/– to select AV JACK , thenpress SET to select OUT/PHONES orIN.• When OUT/PHONES is selected,AUDIO SEL is automatically set toMIC.6 Press +/– to select AUDIO SEL , andthen press SET to select MIC.• Go to step 7 on page 21.Before you begin• Connect the external Microphone(if used).• Connect this unit and the externalrecording source using the A/V Cable.(if used).• Turn on this unit.• Insert a pre-recorded tape to bedubbed.The AUDIO REC setting in REC MODEmenu should be as follows:• Select 12 bit if you do not want theoriginal sound to be completely replacedduring an audio dub.• If you dub over a tape which has both12 bit and 16 bit audio recordings on it,keep in mind that the original 16 bit audioportion will be completely replaced.12 bit16 bitThe original sound is recordedon ST (Stereo) 1, and the newsound will be recorded on ST(Stereo) 2.The original sound is replacedwith the new sound.4, 5, 6+/– (SELECT)3MENU1POWER4, 5, 6SET2PLAY2PAUSEWhen using an External Microphone