Panasonic AG-HMX100P Operating Instructions Manual

Also see for AG-HMX100E: Operating instructions Operating instructions Operating instructions

Panasonic AG-HMX100P Operating Instructions Manual Manual pdf 30 page image

30Basic OperationIf other than [CUSTOM1] and [CUSTOM2] isselected in Step 2, [WASH] is automaticallyselected.5 Use the joystick and rotary Z control to set the[PB] and [PR] values in the range of 0 to 255and the [Y] value in the range of 16 to 235 forselecting the wash color.If other than [CUSTOM1] and [CUSTOM2] isselected, set the color level (the Y signal levelfor white) using the rotary 3 control.6 Set the [GRADE] value (gradation compositionlevel) in the range of 0 to 255 using the rotary 5control.7 Set the gradation position using the rotary 5control while holding down the SHIFT key. NOTEThe back matte settings are saved with the menu settingvalues ([Pb], [Pr], and [Y]) for each color.(However, if [PRESET] is selected in the [POWER] submenu ofthe [SETUP] menu, the settings are reset to the factory defaultsettings when the unit is restarted.)Outputting Color Bars[COLOR BAR]To output color bars as internal video, select [COLOR BAR]of the [INT VIDEO] menu using the rotary 1 control.Using Still Pictures or Movies asInternal Video [MEMORY]In addition to using the back matte video ( page 29) andcolor bar output ( the previous section) built in this unit, itis possible to store external video input sources in internalmemory and create still pictures and movies.Created still pictures and movies are saved with one-frame video as one page. The number of pages (frames)available for saving a created picture or movie varies withthe video format ( page 26) for the video input.Format Max. pages (number of frames)480i 30576i 30720p 141080i 6However, if a title created as a title key or downstreamkey is saved as a page, a reduced number of pages areavailable for saving the still picture or movie.The page count ratio for the title and still picture or moviecan be changed from the [MEMORY] submenu of the[SETUP] menu ( page Vol.2-27).Use the [MEMORY] submenu of the [INT VIDEO] menu tocreate and display still pictures and movies.If a still picture is created, “ST (STILL)” and the number ofpages are displayed in the internal video display area in theupper portion of the Setting screen. If a movie is created,“MV (MOVIE)” and the number of pages are displayed.Relationship between Internal Video Saveand Internal MemoryWhen internal video is saved, the [MEMORY] submenu ofthe [SETUP] menu is used to set the following to save thevideo in internal memory.PAGE: First page to save•FRAME: No. of pages to save•If the number of saved pages is 1 (“FRAME” is set to 1),the video is saved as a still picture. If the number of savedpages is 2 or more (“FRRAME” is set to 2 or more), thevideo is saved as a movie.Both a still picture and a movie can be saved in internalmemory. In this case, however, the total of saved pagesmust be equal to or less than the maximum number offrames.For example, if the memory size (the number of frames)assigned for internal video is set to 4 in the [MEMORY]submenu of the [SETUP] menu, four still pictures canbe saved in memory when a still picture (FRAME: 1) iscreated; only one movie can be saved in memory when amovie consisting of four pages (FRAME: 4) is created.Example of Video Save in Internal Memory of Maximum8 Frames[PAGE]=1[FRAME]=2[PAGE]=3[FRAME]=3[PAGE]=6[FRAME]=1[PAGE]=7[FRAME]=1(Movie) (Movie) (Still) (Still) NOTEIf video is saved in the memory areas overlapping those inwhich other video is already saved, the overlapping areasare overwritten by new data and the remaining areas for theprevious video are cleared and filled with black image.Before new video save (currently saved video of PAGE: 1 andFRAME: 5)After new video save (PAGE: 3 and FRAME: 5)