Panasonic AG-HMX100P Operating Instructions Manual

Also see for AG-HMX100E: Operating instructions Operating instructions Operating instructions

Panasonic AG-HMX100P Operating Instructions Manual Manual pdf 75 page image

27Chapter 4 Operating Environment SettingSetting [MEMORY]This section describes the method of allocating memoryfor internal video and titles separately. The memory isused to save the internal video created from input video( page Vol.1-30) and title keys ( page 8).The [MEMORY] submenu of the [SETUP] menu is used. NOTEIf the memory settings are changed in this submenu, all datasaved in the memory is cleared.Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 50-30 (480/59i)0-30 (576/50i)0-14 (720p)0-6 (1080i)0-30 (480/59i)0-30 (576/50i)0-14 (720p)0-6 (1080i)MEMORY 30INT V 0TITLE1 Set [INT V] (internal video memory size) usingthe rotary 2 control and [TITLE] using the rotary3 control, respectively.The total memory size (number of frames) varieswith the video format ( page Vol.1-26). When thesize of either internal video memory or title memoryis increased, the other may be automaticallydecreased to prevent the sum of the two values fromexceeding the total memory size.If the [INT V] or [TITLE] value is changed, * appearsunder [INT V] or [TITLE], respectively.2 Press the key with * displayed.The message [OK?] appears.3 Press the key again to fix the change.To cancel the change, press the key whileholding down the SHIFT key.If other menu screen is displayed when * is beingdisplayed, the settings return to the previous valueswithout being updated.The factory default settings are as shown below.Video Format [INT V] [TITLE]1080/59i 3 31080/50i 3 3720/59p 7 7720/50p 7 7480/59i 15 15576/50i 15 15Setting the Audio Level[AUDIO LEVEL]The audio level is indicated by the audio level meter on thesetting screen ( page Vol.1-20).The [AUDIO LEVEL] submenu of the [SETUP] menu is usedto make the settings for the audio level.Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5-3dB0dB4dB18dB20dBLEVEL ALIGN.AUDIO 0dB 20dBHEADAG-HMX100PRotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5-3dB0dB4dB18dB20dBLEVEL ALIGN.AUDIO 0dB 18dBHEADAG-HMX100ESet [ALIGN.] to [−3dB], [0dB] or [4dB] using the rotary 2control.The factory default setting is [0dB]Set [HEAD] (head room) to [18dB] or [20dB] using therotary 5 control.The factory default setting is [20dB] (AG-HMX100P) or[18dB] (AG-HMX100E).When the head room value is changed, the reference markof the audio level meter ( page Vol.1-20) is also changedon the Setting screen.