Panasonic AG-HMX100P Operating Instructions Manual

Also see for AG-HMX100E: Operating instructions Operating instructions Operating instructions

Panasonic AG-HMX100P Operating Instructions Manual Manual pdf 27 page image

27Basic OperationWhen the 3D mode is [OFF] (s  page Vol.2-25), the systemformat of this unit is the one set in the [VIDEO FORMAT]submenu of the [SETUP] menu. When the 3D mode is otherthan [OFF], the system format of this unit is the one setunder the [3DFORMAT] item in the [3D] submenu of the[SETUP] menu.Setting the Bus [BUS]The [BUS] submenu of the [SETUP] menu is used to set theoutput method of this unit to either of the following:AB bus system: Switches between video A and video B.s0ROGRAM0RESETSYSTEM3WITCHESBETWEENPROGRAMsOUTPUTBASEVIDEO ANDPRESETOUTPUTVIDEOUSEDASEFFECTS 7HENTHE0ROGRAM0RESETSYSTEMISSELECTED THE!02/'bus source selector button corresponding to the sourceused for the transition pattern and output from a PGMCONNECTORISNECESSARILYLIGHTEDORmASHES4HUS ANINPUTsource that you want to display next can be selected onlyWITHTHE"02%3%4BUSSOURCESELECTORBUTTONS For more information about the input source selectionoperation, see page 33.Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5ABPRG/PRETYPEBUS AB3ET;490%=TO;!"=!"BUSSYSTEM OR;02'02%=0ROGRAM0RESETSYSTEM USINGTHEROTARYCONTROLThe factory default setting is [AB].Setting Audio Channels [AUDIO CH]4HE;!5$)/#(=SUBMENUOFTHE;3%450=MENUISUSEDTOSELECT,CHANNELOR2CHANNELOFTHISUNITFOREACHAUDIOCHANNELOFTHESELECTED3$)INPUTSOURCE7HENTHESYSTEMFORMATIS($PAGE AUDIOchannels 1 to 8 can be assigned. When the system formatIS3$ AUDIOCHANNELSTOCANBEASSIGNEDRotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 51-8 (1-4) 1-8 (1-4) OFFONSDI1SDI2SDI3SDI4CH CHAUDIO SDI1 1 2 ONL-CH R-CH OSD1 Set [CH] to one of [SDI1], [SDI2], [SDI3], or[SDI4] (SDI inputs 1 to 4) using the rotary 2control.2 Use the rotary 3 control to select the audioinput (of the SDI input selected in Step 1) whichyou want to assign the L channel by setting[L-CH] to the desired audio input number.3 Use the rotary 4 control to select the audioinput (of the SDI input selected in Step 1) whichyou want to assign the R channel by setting[R-CH] to the desired audio input number.4 Repeat Steps 1 to 3 to assign each audioinput of SDI inputs 1 to 4 to the L channel or Rchannel. NOTEThe set channel is stored in memory separately between thecases in which the system format is SD and HD ( page 19),and is called according to the format when the system formatis changed.To hide the audio level meter duringmulti-view output3ET;/3$=TO;/&&=USINGTHEROTARYCONTROLThe factory default setting is [ON], in which the audio levelmeter is displayed when the multi-view output is monitored.Setting the Audio Faders[AUDIO FADER]4HEAUDIOINPUTLEVELISADJUSTEDWITHTHE3/52#% FADERSAUDIOFADERS When adjusting the audio level of input sources 5 to 8,operate the corresponding fader while holding down the3()&4KEY/PERATETHE!58FADERTOADJUSTTHE!58INPUTLEVELANDthe MIC fader to adjust the MIC input level.4HEOPERATIONOFTHEAUDIOFADERS !58FADER AND-)#FADERCANBESETFROMTHE;!5$)/&!$%2=SUBMENUOFTHE[SETUP] menu.Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5PAIRSEPA.CP PAIRBUS SEP1BUS SEP212 PAIR12 SEPA.FADER SOURCEAUDIO BUS SEP1 PAIRAUX/MIC