30Basic OperationIf other than [CUSTOM1] and [CUSTOM2] isSELECTED IN 3TEP ;7!3(= IS AUTOMATICALLY selected.5 Use the joystick and rotary Z control to set the[PB] and [PR] values in the range of 0 to 255and the [Y] value in the range of 16 to 235 forselecting the wash color.If other than [CUSTOM1] and [CUSTOM2] isselected, set the color level (the Y signal levelfor white) using the rotary 3 control.6 Set the [GRADE] value (gradation compositionlevel) in the range of 0 to 255 using the rotary 5control.7 Set the gradation position using the rotary 5control while holding down the SHIFT key. NOTEThe back matte settings are saved with the menu settingvalues ([PB], [PR], and [Y]) for each color.(However, if [PRESET] is selected in the [POWER] submenu ofthe [SETUP] menu, the settings are reset to the factory defaultsettings when the unit is restarted.)Outputting Color Bars[COLOR BAR]4O OUTPUT COLOR BARS AS INTERNAL VIDEO SELECT ;#/,/2 "!2= OF THE ;).4 6)$%/= MENU USING THE ROTARY CONTROLUsing Still Pictures or Movies asInternal Video [MEMORY])N ADDITION TO USING THE BACK MATTE VIDEO