112Setup menu list (continued)DUBBING SETUP screenAV IN/OUT SETUP screenItem Displaymode Description of settingsCMPNT OUT SELP2(Camera)(MCR)Selects the type of component terminal.720P: Monitor which supports the D4 terminal1080i: Monitor which supports the D3 terminal480i: Monitor which supports the D1 terminalThe signals recorded in the 720P format are cross-converted only when 1080iformat signals are to be output. In all other cases, they are output without beingconverted.HP MODEP2 TAPE(Camera) Selects the sound heard through the headphones.LIVE:The sound which has been input from the microphone is output as is. Thissetting is selected when delays in the sound are annoying.RECORDING:The sound in the status which is to be recorded (the sound synchronized withthe images) is output.A. DUB INPUTTAPE(VCR) Selects the audio to be recorded for audio dubbing. (Page 81)MIC:This sets the input from the internal microphone, INPUT1 and INPUT2connectors.A_IN:This sets the input from the AUDIO IN/OUT connector.1394 OUTTAPE(VCR) Select ON to convert analog input signals into digital signals and output themfrom the 1394 terminal.ON OFFindicates the factory setting.Item Displaymode Description of settingsFORMAT SEL (DUB) Selects the format of the clips to be played back during dubbing.1080i/60i, 1080i/30P, 1080i/24P, 1080i/24PA, 720P/60P, 720P/30P, 720P/24P,720P/30PN, 720P/24PNPULLDOWN SEL (DUB) Selects the pulldown method for 24PN (native format).24P:The 24 fps images are converted into 60-field interlace signals by the 2:3conversion system.24PA:The 24 fps images are converted into 60-field interlace signals by the 2:3:3:2advanced conversion system.SETUP (DUB) Switch the setup level of video signals in 480i format for dubbing.0%:Setup is switched to 0% for both the camera output and the recording.7.5%:Setup is switched to 7.5% for both the camera output and the recording.
