Panasonic AG-HVX200PJ Operating Instructions Manual

Contents

Panasonic AG-HVX200PJ Operating Instructions Manual Manual pdf 43 page image

Shooting43Zebra patternPress the ZEBRA button in the camera mode toshow the zebra pattern or marker on the screen soyou can check the brightness of the subject.Parts that may be whited out through overexposure are shown as a zebra pattern.• Very bright• Reflecting partsYou can remove most overexposed parts byadjusting the iris and shutter speed in the manualmode to remove the areas with zebra patterns.The display changes as follows each time youpress the ZEBRA button.In the setup menus, DISPLAY SETUP screen,ZEBRA DETECT 1 and ZEBRA DETECT 2, set thebrightness for the zebra patterns. (Page 113)The zebra pattern you have set appears as apercentage on the display for about 2 seconds.MarkerIf you press the ZEBRA button again while thezebra pattern is being displayed, a marker appearsin the center of the display (if you have set thesetup menu, DISPLAY SETUP, MARKER to ON).The brightness of the areas near the screen centercan be checked as a percentage (0% to 99%).“99%↑” appears if the percentage is over 99.The normal display reappears if you press theZEBRA button again.Image level detection areaImage levelMarkerCH 1 SELECT CH 2 SELECT INPUT 1 INPUT 2INT(L)INPUT 1INPUT 2INT(R)INPUT 2ONOFFMIC POWER +48VBARSAUDIOSHUTTER SPEED SELCOUNTER RESET/TC SET ZEBRA OISRESETONOFFZEBRA 1 → ZEBRA 2↑ ↓OFF ← MARKER