43Viewfinder screen status displaysDisplay modes and settingchange messagesThe display of messages advising the user of whatchanges have been made to the settings and what theadjustment results are can be turned off for some orall of the items displayed.The message displays also depend on the status ofother menu settings. For instance, even when “1 (nodisplay)” is set as the filter selection, the filterselection will be displayed when FILTER is set to “ON”on the VF INDICATOR screen.±± : Message is to be displayed.tt : Message is not to bedisplayed.Setting change/adjustment result messages and display modesSituation in which message is displayed MessageDisplay modesetting1 2 3tt tt ±±When the filter selection has been changed Filter: n (n=1, 2, 3, 4), m (m=A, B, C, D)tt tt ±±When the gain setting has been changed GAIN: n dB(n= –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30)tt tt ±±When the WHITE BAL switch setting has beenchangedWHITE: n (n=ACH, BCH, PRESET)tt ±± ±±When the OUTPUT/AUTO KNEE switch hasbeen set to AUTO KNEE or OFFThis display is shown for about 3 secondsimmediately after the unit’s power has beenswitched on.AUTO KNEE: ON (or OFF)tt ±± ±±When the shutter speed/mode setting has beenchangedSS: 1/100 (or 1/120, 1/250, 1/500, 1/1000, 1/2000,S.SCAN, SUPER V)tt ±± ±±When the white balance (AWB) has beenadjustedExample) AWB: OKFor details, refer to “Adjusting the white balance”(pages 47 to 50).tt ±± ±±When the black balance (ABB) has beenadjustedExample) ABB: OKFor details, refer to “Adjusting the black balance” (page51).
