45CH 1 CH 2200EMPHASIS40-dB1030EBATTFTAPERF SERVO HUMID SLACKDF SLAVE TCG HOLDh min s frmScreen displaysDisplays relating to errors andwarningsFor details, refer to “Warning system” (pages 105 and106).Remaining tape displayWhen there are 21 or more minutes of the tape remaining,all 7 segments up to the “F” position light.When there are less than 21 minutes of the taperemaining, the segments go out one by one in sequenceevery 3 minutes.Remaining battery charge displayIf a battery with a digital display (% display) is used, all 7segments up to the “F” position light when the 70% ormore of the battery charge remains.When there is less than 70% of the battery chargeremaining, the segments go out one by one in sequenceevery time the remaining charge drops by 10%.Audio channel level meterCH 1 CH 2200EMPHASIS40-dB1030EBATTFTAPERF SERVO HUMID SLACKDF SLAVE TCG HOLDh min s frmError code displayWarning displaysRF : Clogged video headSERVO: Servo disturbanceHUMID : Formation of condensation on the head drumSLACK: Problem in tape take-upDisplays relating to time codesTime code-related switch settings and displayitemsCH 1 CH 2200EMPHASIS40-dB1030EBATTFTAPERF SERVO HUMID SLACKDF SLAVE TCG HOLDh min s frmTime counter displayThis displays the time code, CTL, user’s bit and actualtime. For the correlation between the items displayed andthe switches, refer to the next section.These displays light for the time code, CTL and actualtimeDF : Drop frame modeSLAVE : External locking of the time codeHOLD : Time code generator in the hold mode (when theHOLD button has been pressed)TCG switchpositionDISPLAY switchposition Display itemSETTC or CTL Time codeF-RUN or R-RUNUB User’s bitCTL CTLTC Time codeUB User’s bitIf the HOLD button is pressed while the DISPLAYswitch is set to UB, “HOLD” on the counter display willflash for as long as the switch is held down, and theVITC user’s bit information recorded in the video AUXarea will appear on the counter display.Remaining battery charge andaudio channel level andremaining tape displays