89Setting menu screens (CAM MAIN MENU 3)GENLOCK/IRIS screenThe genlock and iris control settings are performed onthis screen.Item Variablerange RemarksVFdisplayH PHASECOARSE0:7:15USERENGFor coarsely adjusting theH phase during genlock.H PHASE FINE 0:32:64USERENGFor finely adjusting the Hphase during genlock.A. IRIS LEVEL 0:82:100USERENGFor setting the auto iristarget level.The brightness (iris) iscontrolled using this value.The higher the valueselected, the higher thebrightness.A. IRISPEAK/AVE0:16:100USERENGFor setting the ratiobetween the auto iris peakand average value.The closer the setting is to0, the greater thetendency toward averagecontrol; conversely, thecloser the setting is to100, the greater thetendency toward peakcontrol.A. IRIS MODE NORM1NORM2CENTRUSERENGFor selecting the auto irismode.NORM1:The light is measured forthe entire screen (exceptfor the edges).NORM2:The light is measured forthe entire screen (exceptfor the top part).CENTR :The light is measured inthe center area of thescreen only.S. IRIS LEVEL 0:100USERENGFor setting the super iristarget level.(Backlight compensationmode)The underlining in the variable range column indicates the setting in the preset mode.LENS ADJ screenThe lens adjustments are performed on this screen.Item Variablerange RemarksF2.8 ADJ ONOFFVFdisplayENG For outputting the voltageoutput only when ON isselected as this item’ssetting.F16 ADJ ONOFFENG For outputting the voltageoutput only when ON isselected as this item’ssetting.When using a lens which enables the open limit and close limit ofthe lens aperture to be adjusted, set “F2.8ADJ” or “F16ADJ” to ON,and repeatedly adjust so that the lens aperture will be set to “F2.8”or “F16.”(This adjustment need not be performed if the lens does not havethis adjustment function.)
