53Setting the synchro scan mode2 In the SYNCHRO SCAN mode, continuousswitching inside the 30.3 Hz to 250.2 Hz range canbe achieved by pressing the SYNCHRO (“+” and“–”) buttons.Setting the electronic shutterChanging the shutter speedand mode selection range1 Perform the menu operations (pages 70 to 72),and display the “SHUTTER SPEED” screen.4 Press the MENU button to exit the menuoperations.The setting menu is cleared, and the displayshowing the unit’s current statuses appears at thetop and bottom of the viewfinder screen.O When operating the unit from the AJ-EC3 extensioncontrol unit (optional accessory), the shutter speedselected by the AJ-EC3 switch will take precedencein determining the actual shutter speed even whenoperations have been performed on the unit’sSHUTTER SPEED screen.O For details on selecting the engineer mode anddisplay screens, refer to “Menu operations” (pages70 to 72).On the SHUTTER SPEED screen of CAM MENU, thesetting range of the shutter speed can be restricted tothe required range and whether or not to use thespecial operation modes (SYNCHRO SCAN andSUPER V) can be selected.2 Turn the JOG dial button to move the arrow(cursor) to the desired item.3 Press the JOG dial button to set the item to bechanged.Turn the JOG dial button to select ON or OFF, andpress the button to enter the setting.SHUTTER switch1 Press the SHUTTER switch from ON to SEL andset to SYNCHRO SCAN.n< SHUTTER SPEED >SYNCHRO SCAN :ONSUPER V :OFF1/100 :ON1/120 :ON1/250 :ON1/500 :ON1/1000 :ON1/2000 :ON
