60If one of the following messages appears when the JOG dialbutton is pressed, the card will not be formatted.5 Press the MENU button to exit the menuoperations.The setting menu is cleared, and the displayshowing the unit’s current statuses appears at thetop and bottom of the viewfinder screen.Error message Remedial actionCONFIG NGNO CARD(setup card has not beeninserted)Insert the card.CONFIG NGERROR(the card cannot be formatted)The card may be defective.Replace it.The operations for saving setting data on the setupcard and loading the saved data from the card areperformed on the CAM CARD READ/WRITE screenof CAM MAIN MENU 3.Formatting the setup cardSetup card operations1 Perform the menu operations (pages 70 to 72),and display the “CAM CARD READ/WRITE”screen.4 To proceed with the formatting of the setup card,turn the JOG dial button to move the arrow (cursor)to YES, and press the JOG dial button. When theformatting of the card is completed, the followingmessage appears.When the card is formatted, the settings statusesapplying at the time are also saved in the memory.3 When the JOG dial button is pressed, the followingmessage appears on the screen.< CAM CARD READ/WRITE >READSELECT :1WRITESELECT :1CARD CONFIGREAD USER DATATITLE :CONFIG OKn< CAM CARD READ/WRITE >SELECT :1READSELECT :1WRITECARD CONFIGREAD USER DATATITLE :< CAM CARD READ/WRITE >READSELECT :1WRITESELECT :1CARD CONFIGREAD USER DATATITLE :CONFIG ?YESn NO2 Turn the JOG dial button to move the arrow(cursor) to the CARD CONFIG item.< CAM CARD READ/WRITE >SELECT :1READSELECT :1WRITEn CARD CONFIGREAD USER DATATITLE :
