Panasonic AJ-HDC27A Operating Instructions Manual

Also see for AJ-HDC27AP: Operating instructions

Contents

Panasonic AJ-HDC27A Operating Instructions Manual Manual pdf 95 page image

95Setting menu screens (VTR MAIN MENU)FUNCTION screenThe VTR’s functions are set on this screen.Item Variablerange RemarksNEWS RECMODEOFF0.2:2.0VFdisplayUSERENGFor selecting the VTRSTART buttonacknowledgment timeduring recording.OFF:The pressing of the VTRSTART button isacknowledgedimmediately, recording isstopped, and the unit is setto the REC PAUSE mode.0.2—2.0:The pressing of the VTRSTART button is notacknowledged andrecording is continued forthe time set (in incrementsof 0.2 sec.).Item Variablerange RemarksHD SDI OUT ONSIDE SWAUTOOFFVFdisplayUSERENGFor controlling the outputsignals of the HD SDI OUTconnector.However, ON or OFFcannot be selected forthese signals duringrecording: the status prior tothe start of the recording ismaintained.ON:The signals are forciblyoutput. However, thesignals are output in theEE/PB mode when theMONITOR OUT SDIswitch on the side panel isset to OFF.SIDE SW :The signals are not outputwhen the MONITOR OUTSDI switch on the sidepanel is set to OFF.AUTO:The signals are outputwhen the connector hasbeen connected to theoutput connector.However, the signals areoutput in the EE/PB modewhen the MONITOR OUTSDI switch on the sidepanel is set to OFF.OFF:The output is stopped.HUMID OPE ONOFFUSERENGFor selecting the VTRoperation whencondensation has formed.ON : Operation iscontinued as usual.OFF : Operation of allcontrols except thePOWER switch andEJECT button isinhibited.REC START ALLNORMALUSERENGFor selectingacknowledgement of recordingstarted by the VTR STARTbutton.ALL:The start of the recording isacknowledged regardless ofthe VTR mode.NORMAL:The start of the recording isacknowledged only in theSTOP (POWER SAVE) modeand REC PAUSE mode.PAUSE TIMER 10203060USERENGFor selecting the amount oftime REC PAUSE is to be held.10/20/30/60: 10, 20, 30 or 60minutes.RETAKE MODE ONOFFUSERENGFunctions for rewindingthe tape to the positionwhere recording started.ON : The RETAKEfunction works.OFF : The RETAKEfunction does notwork.The RETAKE function isset OFF when the unit’spower switch has been setto ON.INTERVAL RECMODEONOFFUSERENGFor selecting theintermittent recordingmode.ON:Intermittent recording isperformed.OFF:Intermittent recording isnot performed.Intermittent recording isset OFF when the unit’spower switch has been setto ON.INTERVAL RECTIME00s10f:59s29fUSERENGFor setting the REC time forintermittent recording.When REC time is set atless than 1 second, theinitial recording time willbe 1 second.INTERVALPAUSE TIME00h00m02s:23h59m59sUSERENGFor setting the RECPAUSE time forintermittent recording.The underlining in the variable range column indicates the setting in the preset mode.