9Power supply section1 Battery mountThis is for attaching the Anton/Bauer battery pack.2 DC IN (external power input) socket (XLR, 4P)When operating this unit using an AC powersource, this socket is connected to the model AJ-B75 AC adapter (optional accessory).3 BREAKER buttonTo protect the equipment, the circuit breaker istripped when an overcurrent flows inside the unit,and the power is automatically turned off. Push thisbutton to the pushed-in position after performinginternal inspections and adjustments. If there is noproblem, the power will be turned back on.4 POWER switchON : Set here to turn on the power.OFF : Set here to turn off the power.Parts and their functions4123Accessory mounting section1 Hooks for attaching shoulder strapAttach the ends of the accessory shoulder strap tothese hooks.2 Light shoeUse this to attach the video light, etc.3 Lens mount (Bayonet type)Use this to attach the lens.4 Lever for securing lensInsert the lens into the lens mount 3, and turn thelens mount ring using this lever to secure the lens.5 Lens mount capTo remove the cap, push the lever for securing thelens 4 up.Keep the cap in place while the lens is notattached.6 Lens cable/microphone cable clampThis clamp is for anchoring the lens cable ormicrophone cable.7 Tripod mountMount the tripod attachment (SHAN-TM700),available as an optional accessory, when the unit isto be anchored to the tripod.8 LENS terminal (12-pin)The connecting cable of the lens is connected here.For details concerning the lenses that can be used,consult your dealer.9 Shoulder padThis pad can be adjusted to facilitate operationwhen the unit is operated on the user’s shoulder.The pad position can be moved forward orbackward when the two securing screws areloosened.21196634785
