636 Turn the JOG dial button to move the arrow(cursor) to YES, and press the JOG dial button.When the data loading is completed, the followingmessage appears.To load the VTR unit’s data, open the VTR CARDREAD/WRITE screen, and perform steps 4 to 6.< CAM CARD READ/WRITE >READSELECT :1WRITESELECT :1CARD CONFIGREAD USER DATATITLE :READ OKYESn NOTITLE :If one of the following messages appears when the JOG dialbutton is pressed, the data cannot be loaded.7 Press the MENU button to exit the menuoperations.The setting menu is cleared, and the displayshowing the unit’s current statuses appears at thetop and bottom of the viewfinder screen.Error message Remedial actionREAD NGNO CARD(setup card has not beeninserted)Insert the card.READ NGFORMAT ERROR(formatting error)The card was formatted by adevice other than the unit.Replace the card.READ NGNO FILE(file not found)Save the file data.READ NGERROR(the data cannot be loaded)Data saved by devices other thanunit cannot be loaded.Loading the data saved on thecardSetup card operationsSelect the file No.Load the data of the selected file.1 Perform the menu operations (pages 70 to 72),and display the “CAM CARD READ/WRITE”screen.n< CAM CARD READ/WRITE >SELECT :1READSELECT :1WRITECARD CONFIGREAD USER DATATITLE :2 Turn the JOG dial button to move the arrow(cursor) to the SELECT item which comes afterREAD, and press the JOG dial button.3 Turn the JOG dial button to select any numberfrom 1 to 8, and press the JOG dial button.4 Turn the JOG dial button to move the arrow(cursor) to the READ item.< CAM CARD READ/WRITE >SELECT :1n READSELECT :1WRITECARD CONFIGREAD USER DATATITLE :5 When the JOG dial button is pressed, the followingmessage appears.< CAM CARD READ/WRITE >READSELECT :1WRITESELECT :1CARD CONFIGREAD USER DATATITLE :READ ?YESn NOTITLE :< CAM CARD READ/WRITE >n SELECT :1READSELECT :1WRITECARD CONFIGREAD USER DATATITLE :
