Panasonic AJ-HDP151P Operating Instructions Manual

Contents

11Setup MenusSYSTEM menuThe underlining indicates the factory setting.01 INPUT SEL00000001HD SDISDTIFor selecting the unit’s input and determining its operation mode.0: HD SDI is selected for the unit’s input.The unit operates as an encoder, and SDTI is output.1: SDTI is selected for the unit’s input.The unit operates as a decoder, and HD SDI is output.05 ENCODER SEL000000010002REMOTELOCALBOTHFor selecting whether the SDI output signals are to be adjusted by the unit or by theexternal encoder remote controller.0: The SDI output signals are adjusted by the external encoder remote controller.1: The SDI output signals are adjusted by the unit.2: The SDI output signals are adjusted by the unit and external encoder remotecontroller.This setting takes effect when the unit is used as a decoder.06 V LEVEL CTRL000000010002HDSDBOTHFor selecting what is to be controlled when the video output level is adjusted by theexternal encoder remote controller.0: The HD video output level can be adjusted.1: The SD video output level can be adjusted.2: Both the HD and SD video output levels can be adjusted.This setting takes effect when the unit is used as a decoder.12 SYS H (HD) 0550:1100:1650–500:0:500For adjusting the system phase of the HD SDI output (in 27 ns steps).–: The phase is moved forward.+: The phase is moved backward.This setting takes effect when the unit is used as a decoder.It remains unchanged even when the menu is initialized.13 V PHASE (HD) 0000:0500:1000–500:0:500For adjusting the video phase of the HD SDI output (in 27 ns steps).–: The phase is moved forward.+: The phase is moved backward.This setting takes effect when the unit is used as a decoder.16 SDI SYS H (SD) 0000:0429:0858–429:0:429For adjusting the system phase of the SD SDI output (down-converted from HD) (in27 ns steps).–: The phase is moved forward.+: The phase is moved backward.This setting takes effect when the unit is used as a decoder.It remains unchanged even when the menu is initialized.20 AV PHASE 0000:0100:0200–100:0:100For adjusting the phase of the audio output in relation to the video output (in 20.8 μssteps).–: The phase is moved forward in relation to the video output.+: The phase is moved backward in relation to the video output.This setting takes effect when the unit is used as a decoder.Item SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of setting