Panasonic AJ-HDP151P Operating Instructions Manual

Contents

7Rack MountingThe unit can be mounted in a 19-inch standard rack using the accessory rack-mounting adapters.It is recommended that the slide rails and brackets specified below be used for installation.CC3001-99-0191 slide rails and B-308 brackets made by CHASIS TRAK.For further details, consult your dealer.1. Remove the four feet from the unit’s bottom panel.O Take care not to subject the unit to vibration orimpact.3. Mount the slide rail inner members onto the unit.4. Attach the outer members of the slide rails and thebrackets to the rack.Check that the height is the same at the left andright.6. Remove the stoppers of the inner members, andinstall the unit in the rack.After installation, check that the unit movessmoothly.O Keep the temperature inside the rack within the41°F to 95°F (5°C to 35°C) range.O Bolt the rack securely to the floor to prevent itfrom toppling over when the unit is pulled out.O Use the screws provided with the rack-mountingadapters as the mounting screws.O Be absolutely sure to screw down the rack-mounting adapters in the two places each on theleft and right.O The length of the mounting screws is subject torestriction.Use the screws (M4a10) provided with the sliderails.If one or more mounting screws have been lostor misplaced, use screws less than 10 mm long.O Be absolutely sure to screw down the innermembers in the four places each on the left andright.2. Mount the slide rail spacers onto the unit.O Use the flat countersunk head screws providedwith the slide rail spacers as the mountingscrews.O Be absolutely sure to screw down the slide railspacers in the two places each on the left andright.5. Attach the rack-mounting adapters to the unit.