Panasonic AJ-HDP151P Operating Instructions Manual

Contents

19Warning Messages and DIAG DisplayWarning MessagesWhen the cooling fan has stopped, the warningmessage “FAN STOP” will appear on the front displaypanel of this unit.If “T&S&M” has been selected as the setup menu itemNo.006 (DISPLAY SEL) setting, the warningmessages will be superimposed onto the TV monitordisplay when a monitor has been connected to theHD/SD SDI OUT3 connector.When two or more warnings have occurred, themessage with the highest priority will appear.Given below are the warning messages and thesequence of priority.FAN STOP:The cooling fan has stopped.VIDEO NO INPUT:Video signal is not input.AUDIO NO INPUT:Audio signal is not input.TC NO INPUT:Time code signal is not input.REF NO INPUT:Reference signal is not input.DIAG DisplayIf the front panel DIAG button is pressed while nosetup menu operations are being performed, the unit’shour-meter (OPERATION) and warning message canbe displayed on the display panel.The hour-meter and warning message will besuperimposed onto the TV monitor display when amonitor has been connected to the HD/SD SDI OUT3connector.When the DIAG button is pressed again, the originalstatus is restored.The hour-meter is displayed following theOPERATION message. The unit’s power-on time isdisplayed in 1-hour increments.Use the [#] and [2] buttons to scroll and refer to themessages on the display panel.Both the hour-meter and warning message appear onthe screen as a superimposed display.If no warnings have occurred, “NO WARNING” isdisplayed.