Panasonic AJ-HDX400P Operating Instructions Manual

Also see for AJ-HDX400: Brochure & specs

Contents

Panasonic AJ-HDX400P Operating Instructions Manual Manual pdf 16 page image

Chapter 2 Parts and their functions165124362-6 Warning/status display section 2-7 Display window and its displaysRemaining tape and remaining battery charge andaudio channel level displaysDisplays relating to the VTR unit’s operations andmodesCTLRF SERVO HUMID SLACKhTAPE E BY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD GPSBATT E FOVER OVER10OO40-dB3020NDFRemaining tape displayThe remaining tape time is displayed using 7 segments.The remaining tape time indicated by each segment is set to 3 minutes or 5minutes using TAPE REMAIN/∫ on the VTR MENU “BATTERY/TAPE”screen. Each time the number of minutes set for the segments elapses, onesegment is cleared.Remaining battery charge displayIf a battery with a digital display (% display) is used, all 7 segments upto the “F” position light when the 70% or more of the battery chargeremains.When there is less than 70% of the battery charge remaining, thesegments go out one by one in sequence every time the remainingcharge drops by 10%. It is also possible to set all 7 segments to light ata 100% battery charge by selecting 100% as the setting for BATTREMAIN FULL on the screen of the VTR menu.Audio channel level meterWhen the MONITOR SELECT CH1/2OCH3/4 switch is set to CH1/2,numbers 1 and 2 indicating the audio channels appear, and the CH1and CH2 audio levels are displayed. Conversely, when it is set toCH3/4, numbers 3 and 4 indicating the audio channels appear, andthe CH3 and CH4 audio levels are displayed.CTLRF SERVO HUMID SLACKhTAPE E BY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD GPSBATT E FOVER OVER10OO40-dB3020NDFError code display(for details, refer to “6-3 Warning system”)Warning displaysRF: Clogged video headSERVO: Servo disturbanceHUMID: Formation of condensation on the head drumSLACK: Problem in tape take-upFor details, refer to “6-3 Warning system.”1 Back tally lampWhen the back tally switch 2 is set to ON, this lampserves the same function as the front tally lamp in theviewfinder.2 Back tally switchThis is used to control the unit’s back tally lamp 1 and reartally lamp 6.ON : The back tally lamp and rear tally lamp operate.OFF : The back tally lamp and rear tally lamp do notoperate.3 WARNING lampWhen a problem of some form or other occurs within theVTR unit, this lamp flashes or lights.4 LIGHT switchThis controls the lighting of the display window.Each time it is pressed, the lighting of the display window5 is set in turn from on to off or vice versa.5 Display windowThis displays the alarms, remaining battery charge, audiolevels, time data, etc. relating to the VTR unit.6 Rear TALLY lampWhen the back tally switch 2 is set to ON, this lampoperates in exactly the same way as the back tally lamp.