Panasonic AJ-HDX400P Operating Instructions Manual

Also see for AJ-HDX400: Brochure & specs

Contents

Panasonic AJ-HDX400P Operating Instructions Manual Manual pdf 52 page image

Chapter 4 Adjustments and settings for recording524-9-3 How to use the user dataThe setting data can be written in the user area of the unit’sinternal memory and data written in the memory can be readfrom this area.Use of this data speeds up the process of reproducingsuitable setup statuses.To write the data, first perform a menu operation to open the screen from the FILE page, and to read theuser data that has been written, first perform a menuoperation to open the screen from the FILE page.7 Press the MENU button to exit the menu operations.The setting menu is cleared, and the displays showingthe unit’s current statuses appear at the top and bottom ofthe viewfinder screen.If one of the following messages appears when the JOG dial button ispressed, the data cannot be loaded.Error message Remedial actionREAD NG NO CARD(setup card has not been inserted)Insert the card.READ NG FORMAT ERROR(formatting error)The card was formatted by a deviceother than the unit.Replace the card.READ NG NO FILE(file not found)Save the file data.READ NG ERROR(the data cannot be loaded)Data saved by devices other than unitcannot be loaded.#< INITIALIZE >READ FACTORY DATAWRITE USER DATA#< SCENE >READ USER DATASCENE SEL :1READWRITERESETTITLE1 : ********TITLE2 : ********TITLE3 : ********TITLE4 : ********< INITIALIZE >READ FACTORY DATA# WRITE USER DATAWriting the setting data in the user area1 Perform a menu operation to open the screen.2 Turn the JOG dial button to move the arrow (cursor) tothe WRITE USER DATA item.Loading the user data3 When the JOG dial button is pressed, the followingmessage appears.4 Turn the JOG dial button to move the arrow (cursor) toYES, and press the JOG dial button.The setting data is now written in the user area of theunit’s internal memory.5 Press the MENU button to exit the menu operations.WRITE?YES# NO1 Perform a menu operation to open the screen.2 Turn the JOG dial button to move the arrow (cursor) tothe READ USER DATA item.