Panasonic AJ-HDX400P Operating Instructions Manual

Also see for AJ-HDX400: Brochure & specs

Contents

Panasonic AJ-HDX400P Operating Instructions Manual Manual pdf 77 page image

7Chapter 7 Menu description tables77HD SDI P.SAVE ONOFFFor selecting whether to output the HD SDIsignal.ON: The HD SDI circuit is set to the powersave mode, and the signal is not outputat any time.OFF: The signal output accords with theposition (VTR, CAM or OFF) selectedby the OUTPUT SEL switch.HD SDI CHAR ONOFFFor selecting whether to superimposecharacters on the HD SDI connector signalsin accordance with the position selected bythe CHARACTER switch on the side panel.ON: The characters are superimposed andoutput.OFF: The characters are not superimposed.DOWNCON CHAR ONOFFFor selecting whether to superimposecharacters onto the down-converted signal inaccordance with the position selected by theCHARACTER switch on the side panel.ON: The characters are superimposed andoutput.OFF: The characters are not superimposed.HD SDI METADATA ONOFFFor selecting whether to output the metadatato the HD SDI signal.ON: The metadata is output.OFF: The metadata is not output.DOWNCONP.SAVEONOFFFor selecting whether to output the down-converted signal.ON: The down-converter is set to the powersave mode, and the signal is not outputat any time.OFF: The signal output accords with theposition (VTR, CAM or OFF) selectedby the OUTPUT SEL switch.DOWNCON SETUP 0%7.5%For setting the setup level of the down-converted output signal.7-2 SYSTEM SETTING7-2-1 REC FUNCTIONThe underlining in the variable range column indicates the setting in the preset mode.INTERVAL RECMODEONONE SHOTOFFFor setting the INTERVAL REC function.ON: Interval recording is possible in single-frame units.ONE SHOT:Recording is performed only once for thetime set in the REC TIME item, after whichit stops.OFF: Interval recording is not performed.The OFF setting is restored when the poweris turned off.REC TIME 00s01f:59s29fFor setting the recording time (one cut).The shortest time is one frame.PAUSE TIME 00h00m00s01f:00h04m59s29f:23h59m59s29fFor setting the recording pause time.The shortest time is one frame.C U FFC U FRETAKE MODE ONOFFFor selecting whether or not to allow retakeoperations (MODE CHECK switch + RETswitch).The OFF setting is restored when the poweris turned off.FTAKE TOTAL TIME NONE:5dayFor setting the time required for shooting.Select a setting from NONE (shootingcontinues until it is stopped manually) to5DAY (5 days).Item/Data storageVariablerange RemarksTOTAL REC TIME 00m00s01f:90m59s29fOVER 100minNONEFor displaying the total recording time. Thesetting for this time cannot be changed.The total time yielded by adding the RECTIME, PAUSE TIME and TOTAL TAKE TIMEis displayed.AUDIO REC OFFONFor setting whether or not to record thesound.PRE REC MODE OFF0SEC:10SECFor setting the PRE REC function.OFF: The PRE REC function is notoperable.0-10SEC: The duration for which pre-recording can be performed afterthe REC START button is pressedis set here.START DELAY 0SEC:10SECFor setting the time taken until recording is tostart after the REC START button is pressedin the INTERVAL REC mode.C U FC U FC U FC U FItem/Data storageVariablerange Remarks7-2-2 OUTPUT SELVF MODE EE/PBEEEE/PB: The images are played back in theplayback mode.EE: The camera images are displayed allthe time.C U FC U FC U FC U FC U FC U FC U FC U FOUTPUT CHAR TCSTATUSMENUONLYFor setting the type of characters to besuperimposed onto the output signals of theVIDEO OUT connector and HD SDIconnector.TC:The time code is displayed. (The menuappears when the menu is displayed.)The time code display position movesvertically in accordance with the camera IDposition.STATUS:All the same characters as the onessuperimposed on the viewfinder aredisplayed. (The menu appears when themenu is displayed.)MENU ONLY:Only appears when the menu is displayed.Normally, nothing is displayed