Panasonic AJ-HDX400P Operating Instructions Manual

Also see for AJ-HDX400: Brochure & specs

Contents

Panasonic AJ-HDX400P Operating Instructions Manual Manual pdf 19 page image

Chapter 3 Recording and playback3193-1 Cassette tapesLoading a cassette tape1 Set the POWER switch to ON.When condensation has formed inside the unit, theHUMID display lights. Wait until this display is clearedbefore proceeding with the intended operation.Ejecting the cassette tapeWhile the power is still on, press the EJECT button to openthe cassette holder, and take out the cassette tape. If anothercassette is not going to be loaded immediately after this tapeis ejected, close the cassette holder.Ejecting the cassette when the battery has nochargeFirst, set the POWER switch to OFF to turn off the unit’spower.Then turn the power back on, and immediately hold down theEJECT button.The cassette can be removed when there is still some powerleft in the battery. However, do not repeat this operation.To prevent accidental erasureSet the cassette’s tab to SAVE to prevent the recordings onthe tape from being erased accidentally.2 Press the EJECT button.The cassette holder opens.3 Insert the cassette tape and press the part marked withthe arrow to close the cassette holder securely.Check that there is no slack in the tape of the cassette.RECSAVEHUMID displayPOWER: ONEJECT buttonCassette holderChecking for tape slackGently push in the reel using your finger and turn the reel inthe direction of the arrow. If the reel fails to turn, it meansthere is no tape slack.