Panasonic AJ-SDC615 Operating Instructions Manual

Contents

Panasonic AJ-SDC615 Operating Instructions Manual Manual pdf 67 page image

Chapter 5 Preparation5675-4 Audio input signal preparationsPrepare to connect the audio components which will supplythe audio signals to the unit.5-4-1 When using the front microphoneThe microphone of the AJ-MC700P mic kit (optionalaccessory) can be attached to the viewfinder.5-4-2 When using an external microphoneFirst attach the AJ-MH700P mic holder (optional accessory).1 Open the mic holder.1 Remove the screws used to attach the mic holder.2 Attach the mic holder to the main unit using the screwsprovided with the AJ-MH700P mic holder.3 Attach the microphone to the mic holder, and tighten thelocking screw.4 Connect the microphone’s connecting cable to the MIC INjack on the camera.2 Attach the microphone, and tighten the locking screw.3 Connect the microphone’s connecting cable to the MIC INjack on the camera.4 Set the AUDIO IN switch or switches to “FRONT” inaccordance with the audio channel or channels whosesound is to be recorded.5 Set the AUDIO IN switch or switches to “FRONT” inaccordance with the audio channel or channels whosesound is to be recorded.LockingscrewMIC IN jackAUDIO INswitchesScrews provided with mic holderLocking screw