Panasonic AJ-SDC615 Operating Instructions Manual

Contents

Panasonic AJ-SDC615 Operating Instructions Manual Manual pdf 88 page image

Chapter 7 Menu description tables887-3-7 ADDITIONAL DTLItem/Data storageVariablerange RemarksKNEE APE LVL OFF12:5For performing the KNEE APE LEVEL setting.CHROMA DTL OFF1:5For performing the CHROMA DTL setting.The chroma edge is detected and placed onthe Y signal to bolster H.DTL. The higher thenumber, the greater the correction.DTL GAIN(+) –31:+00:+31For changing the DTL “+” direction level.DTL GAIN(–) –31:+00:+31For changing the DTL “–” (down) directionlevel.DTL CLIP 00:63For changing the level at which the maximumvalue of the DTL signal is clipped.DTL SOURCE (R+G)/2(G+B)/22G+R+B /4(3G+R)/4RGFor setting the signal source of the DTL signalcomponents.H.DTL LINE MIX 1H2HFor setting the scanning lines for generatingthe H.DTL signal.$ CORNER DTL ONOFFFor selecting ON or OFF for the mode inwhich the resolution is improved in thecorners of the screen.7-3-8 SKIN TONE DTLItem/Data storageVariablerange Remarks$ SKIN TONE DTL ONOFFFor selecting ON or OFF for the skin toneDTL.SKIN TONE ZEBRA ONOFFFor selecting ON or OFF for ZEBRA in theSKIN TONE range.$ SKIN DTLCORING0:5:7For setting the SKIN TONE DTL coring effect.Y MAX 000:190:255For setting the maximum luminance signalvalue for applying the SKIN TONE effect.Y MIN 000:010:255For setting the minimum luminance signalvalue for applying the SKIN TONE effect.I CENTER 000:022:255For setting the center position on the I axis(setting the area to which the SKIN TONEeffect is to be applied).I WIDTH 000:010:255For setting the width of the area to which theSKIN TONE effect is to be applied on the Iaxis centered on the I CENTER.Q WIDTH 000:005:255For setting the width of the area to which theSKIN TONE effect is to be applied on the Qaxis centered on the I CENTER.Q PHASE –128:+00:+127For setting the phase of the area to which theSKIN TONE effect is to be applied asreferenced to the Q axis.R-YB-YQ-WIDTHI-WIDTHQ-PHASEI-CENTERYY-MAXY-MIN0=SKIN TONE AREA– direction+ directionThe underlining in the variable range column indicates the setting in the preset mode.S C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F ES C U F EItems with $ in front of their names are set by the PAINTMENU SW ($) R/W menu items on the R/WSELECT> screen.Items without $ in front of their names are set by the PAINTMENU LEVEL R/W menu item.For details, refer to “7-6-2 CARD R/W SELECT.”SKIN TONE GET — This item is executed when determining thehue which is to serve as the SKIN TONE DTLreference.Align the center marker with the subjectserving as the reference, and then execute.When SKIN TONE GET is executed, thesettings on the MATRIX screen and COLORCORRECTION screen are canceled.S C U F E