Panasonic AJ-SDC615 Operating Instructions Manual

Contents

Panasonic AJ-SDC615 Operating Instructions Manual Manual pdf 73 page image

6Chapter 6 Maintenance and inspections735. Inspection using external microphones1 Connect external microphones to the AUDIO IN CH1 andCH2 jacks.2 Set the AUDIO IN CH1 and CH2 switches to REAR.3 Set the LINE/MIC/+48V selector switch on the back panelto MIC or +48V in accordance with the external mic’spower supply type.MIC : Internal power supply mic.+48V : External power supply mic.4 Point the microphones at the sound source, and checkthat the changes in the audio levels displayed on theaudio level meter of the display window and in theviewfinder reflect the changes in the strength of thesound.This inspection can also be performed for each channelby connecting one of the microphones to each channel inturn.6. Inspections relating to the time code and userbits1 Set the user bits as required.For details on the setting procedure, refer to “4-5-1Setting the user bits.”2 Set the time code.For details on the setting procedure, refer to “4-5-3Setting the time code.”3 Set the TCG switch to R-RUN.4 Press the VTR START button.Check that the figure on the counter display changes asthe tape travels.5 Press the VTR START button again.Check that the tape stops and the figure shown on thecounter display stops changing.7 Set the DISPLAY switch to UB.Check that pressing the HOLD button advances thedisplay value through the sequence VTCG > DATE >TIME > no display (time zone) > TCG.6 Set the TCG switch to F-RUN.Check that the figure on the counter display changesirrespective of the tape travel.6-1-4 Self-diagnosis functionSimplified checks can be undertaken on the unit’s system atsuch times when, for instance, a color video monitor is notavailable.Perform menu operations to open the from the MAINTENANCE page. Check the camera outputlevel setting under the COLOR CHECK item.#< SYSTEM CHECK >COLOR CHECK :OFFY: 0% R: 0%G: 0%B: 0%