Panasonic AJ-SDa755E Operating Instructions Manual

31 (E)CONTENTSSetup menus1 Press the MENU button.2 Press the REW button or FF button while holdingdown the DIAG button to select the USER1 file.4 Turn the search dial while holding down the searchbutton to select the user file whose contents are tobe loaded into USER1.6 Press the PLAY button.The settings of the user file selected in step 4 areloaded, and the USER1 menu display appears. Ifthe STOP button is pressed instead, the settingsare not changed, and the USER1 menu displayappears.7 Turn the search dial to move the cursor (2) on themenu screen to a number other than No. A00(LOAD) or No. A01 (SAVE).8 Press the SET button. The USER1 settings arestored in the memory.If the USER1 settings are not to be stored in thememory, do not press the SET button but press theMENU button instead.5 Press the SET button.The following message appears on the menuscreen and counter display.3 Turn the search dial to move the cursor (2) on themenu screen to No. A00 (LOAD).The contents of the USER2, USER3, USER4 orUSER5 file can be copied (loaded) into the USER1file. Also, the contents of the USER1 file can becopied (saved) into the USER2, USER3, USER4 orUSER5 file.Loading user filesSETUP-MENU MENU<USER1> NO.A00-0000804 BLANK LINE BLANK2A00 LOAD USER2A01 SAVE USER2A02 P.ON LOAD OFFENDSETUP-MENU LOADUSER2 n USER1 OK?YES<PLAY>/NO<STOP>USER 1 USER 2USER 3USER 4USER 5Load/save Lock mode can besetLoad/save Lock mode can besetLoad/save Lock mode can besetLoad/saveLock mode can besetMenu screenCounter displayThe number of the user file selected in step 4 isdisplayed at .