51 (E)CONTENTSSetup menusThe underlined items indicates the initial setting.USER menu No./Item Description800ADD LINE00REC LINE1Sub-screenFor selecting the mode for recording signalson additional lines.0000 OFF : No signals are recorded onadditional lines.0001 YC422 : The 422 mode signals arerecorded on 1 line.0002 YC411 : The 411 mode signals arerecorded on 1 line.0003 Y1_B/W : Only the Y signal is recorded on1 line directly.0004 Y1_BPF : Only the Y signal is recorded on1 line after it has been separatedfrom the C signal.0005 C1 : Only the C signal is recorded on1 line.0006 Y2_B/W : Only the Y signal is recorded on2 lines directly.0007 Y2_BPF : Only the Y signal is recorded on2 lines after it has beenseparated from the C signal.0008 C2 : Only the C signal is recorded on2 lines.When a setting from “0001 (YC422)” to “0008(C2)” is selected and the STOP button ispressed, operation transfers to the sub-screen,and the recording line or lines can be selected.To return from the sub-screen, press the STOPbutton again.For selecting the additional line where thesignals are to be recorded.0000 7L: :0015 22L0016 320L: :0031 335L0032 623L01REC LINE2For selecting the additional line where thesignals are to be recorded.0000 7L: :0015 22L0016 320L: :0018 322L: :0031 335L0032 623LThis menu item is not displayed when additionalline mode setting “1” through “5” has beenselected.No./Item Description803TELETEXTDETFor selecting the method used to detect thelines in which the teletext signals are to berecorded.0000 OFF :The teletext signals are not recorded.0001 AUTO :The teletext signals are automatically detectedand recorded.0002 MANU :The lines in which the teletext signals are to berecorded are selected and set.OThe number of lines in which the teletextsignals can be recorded depends on thenumber of recording lines which was enteredas the setup menu No. 800 (ADD LINE)setting. [See “Number of lines which can be setfor teletext.”]OWhen setting “MANU” is selected and theSTOP button is pressed, operation transfers tothe sub-screen, and the number of recordinglines can be selected.To return from the sub-screen, press the STOPbutton again.OWhen the input signal is a non-standard signalor N-STD has been selected for the setupmenu No. 303 (STD/NONSTD) setting, teletextsignals will not be played back correctly in EEmode.00REC LINE1:14REC LINE15Sub-screenFor selecting the lines in which the teletextsignals are to be recorded.0000 OFF 0009 15&3280001 7&320 0010 16&3290002 8&321 0011 17&3300003 9&322 0012 18&3310004 10&323 0013 19&3320005 11&324 0014 20&3330006 12&325 0015 21&3340007 13&326 0016 220008 14&327Number of lines which can be set for TELETEXTThe number of lines differs, depending on whether ON or OFF hasbeen selected for the setup menu item No. 660 (UMID REC) setting.12 14OFF5 7YC4228 10YC41112 14Y1_B/W, Y1_BPF, C15 7Y2_B/W, Y2_BPF, C2No. 800: ADD LINEsetting valueNumber of lines which can be setUMID REC: ON UMID REC: OFF
